Aussiedistiller, Home Distilling, Moonshine, Home Brew

Hi guys, well after 1.5 yrs I have finally been able to convince the wife on allowing me to a buy a FSD bubbler :romance-kisscheek: :obscene-birdiedoublered:
Now i am i the process to finding parts for a keg boiler that will match the still. I have everything i need, or it is coming, expect a fitting for the drain. I have been looking into what other people have done and rather then using a skin, I would like to try and solder in a NTP WELD SPUD. The only issue is im not sure where i can source them from in aus.



This is what im looking for. If any of you have seem them in aus could you please let me know where.

Cheers

Not sure about that particular part but ebay has loads of ss fittings for every occasion.
I flipped my keg upside down and tri clamped a drain valve on the former top, worked really well.

res wrote:Not sure about that particular part but ebay has loads of ss fittings for every occasion.
I flipped my keg upside down and tri clamped a drain valve on the former top, worked really well.

:text-+1: Yep that's what I did and glad I did :handgestures-thumbupleft:

1 2many wrote:

res wrote:Not sure about that particular part but ebay has loads of ss fittings for every occasion.
I flipped my keg upside down and tri clamped a drain valve on the former top, worked really well.

:text-+1: Yep that's what I did and glad I did :handgestures-thumbupleft:

Totally! Just wished I thought of it before I built my mashing setup :angry-banghead: