Gas Soldering Torch Kit

This is a forum developed for people looking for distilling hardware, here is where you should post links and information as to where we can find stuff on the net or in your local area.

Gas Soldering Torch Kit

Postby Roger » Tue Feb 17, 2015 7:13 pm

What do people think of this for soldering copper??
https://www.aldi.com.au/en/special-buys ... 2-17_16-10
Last edited by Zak Griffin on Tue Feb 17, 2015 7:15 pm, edited 1 time in total.
Reason: Moved thread
Roger
 
Posts: 102
Joined: Thu Jul 03, 2014 10:11 pm
Location: Canberra
equipment: Still Spirits T500 Reflux Condenser and Boiler.
2" pot still for stripping runs.
FSD Neutraliser with 50 litre milk can boiler and gin caddy.

Re: Gas Soldering Torch Kit

Postby rumdidlydum » Tue Feb 17, 2015 7:16 pm

You probably wont get enough heat out or it will take to long to heat up. And probably have to refill while heating i use a similar one to solder wires
rumdidlydum
 
Posts: 2619
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: Gas Soldering Torch Kit

Postby Roger » Tue Feb 17, 2015 7:19 pm

Ah bugger. Was hoping it would be good for 2" or 4" copper pipe
Roger
 
Posts: 102
Joined: Thu Jul 03, 2014 10:11 pm
Location: Canberra
equipment: Still Spirits T500 Reflux Condenser and Boiler.
2" pot still for stripping runs.
FSD Neutraliser with 50 litre milk can boiler and gin caddy.

Re: Gas Soldering Torch Kit

Postby 1 2many » Tue Feb 17, 2015 7:22 pm

rumdidlydum wrote:You probably wont get enough heat out or it will take to long to heat up. And probably have to refill while heating i use a similar one to solder wires


:text-+1: Great for wires but the heat won't be there or gas supply for soldering copper tube. :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Gas Soldering Torch Kit

Postby OzKev » Tue Feb 17, 2015 8:47 pm

I recently got one of these, haven't tried it for soldering yet but I thing it should do the job
http://www.ebay.com.au/itm/Gas-Torch-Fl ... 51b4b6ef19

you just use these gas bottles for it ($4.40 for a 4 pack)
http://www.bunnings.com.au/gasmate-buta ... k_p3171476
OzKev
 
Posts: 356
Joined: Wed Oct 30, 2013 3:54 pm
Location: SE Qld
equipment: 50 L boiler with 2 x 2200w elements, and voltage controller
- Pot still with a 2" column, 1/2" liebig, with a few ogee attachments.
- 3" Modular Boka
Still Spirit Super Reflux
Still Spirit T500

All Grain brewery (BIAB, 1V and a 3v)
Temp controlled fermenting


Return to Distillers Warehouse



Who is online

Users browsing this forum: No registered users and 14 guests

x