Aussiedistiller, Home Distilling, Moonshine, Home Brew

G'day all,

I'm looking to get my hands on a mesh/stainless 2 inch filter disc. I plan on setting up my modular potstill as a carbon filter system, using the disc between parts to hold back the carbon.
Any ideas where i can find them?

:obscene-drinkingcheers:

Could use a single stainless scrubber jammed in the bottom so long as there's something below it to stop it falling out (Valve?) Personally I use cotton wool in my 1" filter.

Stainless stuff from a kitchen store?
Collonder?
Wire Strainer?
Cut them up to 2 inch and fit

At bunnings in the plumbing area they sell a dished disc with holes in it. I think its for sink drains :think:
Not sure if the holes are to big though

I bought a s/s funnel from a cookery supply shop and it came with a removeable perforated disc for filtering.

cheers Phil

rumdidlydum wrote:At bunnings in the plumbing area they sell a dished disc with holes in it. I think its for sink drains :think:
Not sure if the holes are to big though

:text-+1:
i know the ones you mean bout 2mm or 3mm holes? like a perf plate

Thanks for the help folks :handgestures-thumbupleft:

Definitely food for thought!

They use mesh/stainless in the vegetable oil recycling industry biodiesel .

Woodsy71 wrote:G'day all,

I'm looking to get my hands on a mesh/stainless 2 inch filter disc. I plan on setting up my modular potstill as a carbon filter system, using the disc between parts to hold back the carbon.
Any ideas where i can find them?

:obscene-drinkingcheers:

Post is old but have a look here.
http://stores.ebay.com.au/Jet-Gasket-and-Seal-Company/Tri-Clamp-Gaskets-/_i.html?_fsub=514825014
:handgestures-thumbupleft: