by Heef71 » Sat Jan 02, 2016 9:01 pm
@kiwikeg Thanks KK, I usually use this method for stripping with both 2400W elements on. But in this case running in pot mode low and slow. Got it to boil on 1 element and turned down the power with my controller to 4A, about 950W, so the collection rate was about 700mls/hr. Total collection in the 1st batch from 36L of beer is 2.360L. Its still airing. Will taste test and separate my cuts tomorrow. I'm thinkin I'll put the hearts on American oak medium charred.
@rumdidlydum That would be a sight for saw eyes, but the thought had crossed my mind!!! :scared-eek:
It's a good sized corner spa, hold enough water to keep my condenser cool. A small pond pump pushes it thru.