Water pressure

Perforated & bubble cap plated columns

Water pressure

Postby gooie » Sat Feb 13, 2016 3:44 pm

Have been getting some fluctuating output from my still which I think I have traced back to inconsistent water pressure. What do you guys use to control this?

Cheers.
gooie
 
Posts: 27
Joined: Thu Feb 06, 2014 8:41 am
equipment: 4" plated column with Keg Boiler

Re: Water pressure

Postby Darwin award » Sat Feb 13, 2016 4:02 pm

2 x 1000 ltr pods with a submersible pump.... :-D
Darwin award
Site Donor
 
Posts: 318
Joined: Sun Jun 21, 2015 10:57 am
equipment: Reflux still 1x store bought 1x home made copper 1 x eBay pot still....1 FSD Neutralizer set up and happy in it's new home

Re: Water pressure

Postby Redux » Sat Feb 13, 2016 4:03 pm

are you on mains or tank water?
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: Water pressure

Postby gooie » Sat Feb 13, 2016 4:06 pm

Mains.
gooie
 
Posts: 27
Joined: Thu Feb 06, 2014 8:41 am
equipment: 4" plated column with Keg Boiler

Re: Water pressure

Postby Professor Green » Sat Feb 13, 2016 4:09 pm

You could use a pressure regulator. There was a post about them here not too long ago.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2485
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Water pressure

Postby Undertaker » Sat Feb 13, 2016 4:58 pm

Mains water pressure shouldnt fluctuate that much that you would notice it at condenser flow rates? I have barely a turn on my garden tap and that provides enough flow to my needle valve to regulate water flow through my PC.
Town water is usually pretty consistent unless get a broken main. Or you are on water restrictions in your area?

Cheers Phil
Undertaker
 
Posts: 326
Joined: Tue May 12, 2015 6:53 am
Location: Hinchinbrook
equipment: Electric boiler, 2" potstill column. 40" VM column, copper packed,
RC double wound coldfinger,
PC liebig condensor

Re: Water pressure

Postby gooie » Sat Feb 20, 2016 4:44 pm

Picked up a pressure reg from bunnings. Just did a run and the output was much more consistent. :handgestures-thumbupleft:
gooie
 
Posts: 27
Joined: Thu Feb 06, 2014 8:41 am
equipment: 4" plated column with Keg Boiler


Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 19 guests

x