Neutralizer and 50 litre milk can

[Grumpydude]

I received my beautiful neutraliser and 50 litre milk can, just want to thank Allan and Sue for the quality products they supplied me with. It's been a pleasure doing business with you. Cheers to you both, very happy customer. Can't wait to get this baby fired up. Cheers Bill. :dance:

[copperhead road]

Hi bill, just out of interest what is the height of your rig all up (boiler and column) :think:
Am curious what ceiling height you guys would need to have with them taller gigs :handgestures-thumbupleft:

[rumsponge]

http://www.aussiedistiller.com.au/viewtopic.php?f=56&t=6714&p=114439&hilit=neutralizer+height#p114439

depends on the exact configuration, type of boiler connection, blockhead/2x90 bends, boiler type, etc.

for me: 50L keg boiler + 100mm boiler connection + 5 plates + packed section + blockhead = approximately 2.3 meters.

cheers rs

[Professor Green]

From the Neutraliser info on the FSD site:

Total height of unit is from boiler connection is 1740mm

From another post by Mac

100L milk can is 745mm to top of the ferrule

And I think from a conversation I had with Mac or MrsMac, the 50 litre is 635mm

So:
50 litre milk can plus neutraliser would be 2375mm give or take a few mm.
100 litre milk can plus neutraliser would be 2485mm give or take a few mm.

Cheers,
Prof. Green.

[Grumpydude]

Hey copperhead road,
I measured the height of the complete neutralizer configuration on top of the 50 litre milk can and its total height was 2475mm.
Cheers Bill.

[copperhead road]

Hey copperhead road,
I measured the height of the complete neutralizer configuration on top of the 50 litre milk can and its total height was 2475mm.
Cheers Bill.

Thanks grumpydude :handgestures-thumbupleft:
Ceiling height must be an issue for a lot of people I reckon , especially running on gas

[Aussiedownunder01]

Photos or it dident happen

[Grumpydude]

Hey there Aussiedownunder01,

I am struggling with how to put up a photo. Can you give me a few pointers?

Cheers Bill.

[Grumpydude]

Here's a pic of my new rig.

[Plumby]

Take a photo on your phone , then screenshot that photo then upload that screenshot.
Hope that helps, as for doing it on a computer I dont know. I'm no pumpkin farmer but when it comes to that thing I'm about as useful as a shit flavoured chuppa chup.

[Plumby]

Very nice, glad you got the photo stuff sorted :handgestures-thumbupleft:

[Grumpydude]

Thanks Plumby,

My original image was too larger file, plus I am a tech assclown.

Cheers Bill.

[woodduck]

It won't work too well sitting like that :teasing-tease: :teasing-neener: :laughing-rolling: :laughing-rolling:

[db1979]

It won't work too well sitting like that :teasing-tease: :teasing-neener: :laughing-rolling: :laughing-rolling:

No but it'll get to the RC real fast :O)