Page 1 of 1
Neutralizer and 50 litre milk can
Posted:
Wed Jun 21, 2017 11:01 pm
by Grumpydude
I received my beautiful neutraliser and 50 litre milk can, just want to thank Allan and Sue for the quality products they supplied me with. It's been a pleasure doing business with you. Cheers to you both, very happy customer. Can't wait to get this baby fired up. Cheers Bill. :dance:
Re: Neutralizer and 50 litre milk can
Posted:
Wed Jun 21, 2017 11:18 pm
by copperhead road
Hi bill, just out of interest what is the height of your rig all up (boiler and column) :think:
Am curious what ceiling height you guys would need to have with them taller gigs :handgestures-thumbupleft:
Re: Neutralizer and 50 litre milk can
Posted:
Thu Jun 22, 2017 7:44 am
by rumsponge
http://www.aussiedistiller.com.au/viewtopic.php?f=56&t=6714&p=114439&hilit=neutralizer+height#p114439depends on the exact configuration, type of boiler connection, blockhead/2x90 bends, boiler type, etc.
for me: 50L keg boiler + 100mm boiler connection + 5 plates + packed section + blockhead = approximately 2.3 meters.
cheers rs
Re: Neutralizer and 50 litre milk can
Posted:
Thu Jun 22, 2017 8:32 am
by Professor Green
From the Neutraliser info on the FSD site:
Total height of unit is from boiler connection is 1740mm
From another post by Mac
100L milk can is 745mm to top of the ferrule
And I think from a conversation I had with Mac or MrsMac, the 50 litre is 635mm
So:
50 litre milk can plus neutraliser would be 2375mm give or take a few mm.
100 litre milk can plus neutraliser would be 2485mm give or take a few mm.
Cheers,
Prof. Green.
Re: Neutralizer and 50 litre milk can
Posted:
Thu Jun 22, 2017 6:37 pm
by Grumpydude
Hey copperhead road,
I measured the height of the complete neutralizer configuration on top of the 50 litre milk can and its total height was 2475mm.
Cheers Bill.
Re: Neutralizer and 50 litre milk can
Posted:
Thu Jun 22, 2017 7:04 pm
by copperhead road
Grumpydude wrote:Hey copperhead road,
I measured the height of the complete neutralizer configuration on top of the 50 litre milk can and its total height was 2475mm.
Cheers Bill.
Thanks grumpydude :handgestures-thumbupleft:
Ceiling height must be an issue for a lot of people I reckon , especially running on gas
Re: Neutralizer and 50 litre milk can
Posted:
Thu Jun 22, 2017 7:08 pm
by Aussiedownunder01
Photos or it dident happen
Re: Neutralizer and 50 litre milk can
Posted:
Fri Jun 23, 2017 6:49 pm
by Grumpydude
Hey there Aussiedownunder01,
I am struggling with how to put up a photo. Can you give me a few pointers?
Cheers Bill.
Re: Neutralizer and 50 litre milk can
Posted:
Fri Jun 23, 2017 6:56 pm
by Grumpydude
Here's a pic of my new rig.
Re: Neutralizer and 50 litre milk can
Posted:
Fri Jun 23, 2017 6:56 pm
by Plumby
Take a photo on your phone , then screenshot that photo then upload that screenshot.
Hope that helps, as for doing it on a computer I dont know. I'm no pumpkin farmer but when it comes to that thing I'm about as useful as a shit flavoured chuppa chup.
Re: Neutralizer and 50 litre milk can
Posted:
Fri Jun 23, 2017 6:58 pm
by Plumby
Very nice, glad you got the photo stuff sorted :handgestures-thumbupleft:
Re: Neutralizer and 50 litre milk can
Posted:
Fri Jun 23, 2017 7:03 pm
by Grumpydude
Thanks Plumby,
My original image was too larger file, plus I am a tech assclown.
Cheers Bill.
Re: Neutralizer and 50 litre milk can
Posted:
Sat Jun 24, 2017 2:46 pm
by woodduck
It won't work too well sitting like that :teasing-tease: :teasing-neener: :laughing-rolling: :laughing-rolling:
Re: Neutralizer and 50 litre milk can
Posted:
Sat Jun 24, 2017 2:57 pm
by db1979
woodduck wrote:It won't work too well sitting like that :teasing-tease: :teasing-neener: :laughing-rolling: :laughing-rolling:
No but it'll get to the RC real fast :O)