by j0sh2008 » Sat Aug 19, 2017 1:59 am
Hey all,
I was talking to stig a few weeks ago and I have been busy, but i told him I would put some pics up so here we go.
I started working on a 2" pot still and finished it and realised it was too small. So I decided to build a 4" bubbler.
It's almost done, just waiting for a few more parts to come. I have ordered caddy lock nuts so it easy to assemble and disassemble. Hopefully they will be here in next few weeks. Once they come I will put all the m8 rods in (just there to see how it looks together)
I'm going to build a power controller later. I have most of the parts. I will post some pics later
100L milk can boiler
3600w + 2400w elements
4 X bubble plates
4" RC & 2" PC with flow meters
I have ordered a parrot from 5SD and I'm using a electric parrot also. That's the 2" tee between the 180 and the PC.
I'm running a recirculating water system.
2 X 1000 L IBC with a 750w submersible pump. ( will add photos tomorrow )
You do not have the required permissions to view the files attached to this post.
Last edited by
The Stig on Tue Aug 07, 2018 4:39 pm, edited 1 time in total.
Reason: Edited tital as per Josh's request(with my own twist)