Blucs bubbler

Perforated & bubble cap plated columns

Re: Blucs bubbler

Postby bluc » Tue Dec 18, 2018 7:20 pm

If its not vertical the reflux would not flow through the packing right it would run down side of packed section rather than through media :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Blucs bubbler

Postby ThePaterPiper » Tue Dec 18, 2018 7:30 pm

Ahh. Fair enough, I thought the important time would be from vapor to liquid. Interesting.
ThePaterPiper
 
Posts: 336
Joined: Sat May 27, 2017 5:56 pm
Location: Newcastle
equipment: 50L Pot Still with two inch column into a 700mm Liebig. Also have a 19l thumper interchangeable into the setup.

Re: Blucs bubbler

Postby bluc » Tue Dec 18, 2018 7:32 pm

As it flows over packing its is constantly going through vapour to liquid phases which pulls water from the distillate :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Blucs bubbler

Postby ThePaterPiper » Tue Dec 18, 2018 7:42 pm

:handgestures-thumbupleft:
ThePaterPiper
 
Posts: 336
Joined: Sat May 27, 2017 5:56 pm
Location: Newcastle
equipment: 50L Pot Still with two inch column into a 700mm Liebig. Also have a 19l thumper interchangeable into the setup.

Previous

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 14 guests

x