RC Al wrote:Perf can run up to 20% faster than a bubbler, but not cleaner
What? I can run as hard as I can but it will be a stripping run :wtf:
Where are you pulling that figure from?
RC Al wrote:Perf can run up to 20% faster than a bubbler, but not cleaner
scythe wrote:Why wven have plates if you are chasing neutral?
Take you plates out and fill the column with scrubbers and have a 4"boka....
Have a gap in the scrubbers that line up with your sight glasses so you can see if its flooding.
Doubleuj wrote:That’s not such a silly idea scythe, couldn’t you even leave your plates in and chuck a scrubber on top of each plate?
Wouldn’t that give more surface area and more “theoretical” plates?
Not so easy with a glasser like mine but easy for someone with sight glasses
scythe wrote:Why wven have plates if you are chasing neutral?
Take you plates out and fill the column with scrubbers and have a 4"boka....
Have a gap in the scrubbers that line up with your sight glasses so you can see if its flooding.
bluc wrote:So is there a point power input wise that should not be passed to avoid smearing? On a 4" plated still.
My setup chugs away at approx 2700w but any harder and I get sone flooding from bottom up.
I gues its just my downcommer design letting me down but is there any point to going to macs style of straight pipe with a cap.
Or am I just going to run into smearing issues if I run faster with better downcommers :think:
Currently takes approx 3hrs from cold to switch off with 3600w heat up and 2700w run speed.. input appreciated.. :handgestures-thumbupleft:
Return to Plated Column Stills
Users browsing this forum: No registered users and 89 guests