Aussiedistiller, Home Distilling, Moonshine, Home Brew

Bulk of my hearts coming in at 93abv non temp corrected.
Cuts pronounced and I reakon I can pick them off still(still collect start and end in small amounts).
This is sweet as and worth every penny I spent. :D
thanks again to the fellas who spotted me the 4" and scythe for the rings, will have to get the packed section sorted asap..itchin to do some vodka and gin

Bubblers are so worth it :D
Well done mate :clap:

Glad to hear she's working well for ya. Nice work :handgestures-thumbupleft:

Thanks fellas. :handgestures-thumbupleft:

bluc wrote:Bulk of my hearts coming in at 93abv non temp corrected.
Cuts pronounced and I reakon I can pick them off still(still collect start and end in small amounts).
This is sweet as and worth every penny I spent. :D
thanks again to the fellas who spotted me the 4" and scythe for the rings, will have to get the packed section sorted asap..itchin to do some vodka and gin

You know the saying, without pics this never happened :laughing-rolling: :teasing-tease:

:text-+1:

Peer-group pressure applied successfully!


sometimes I hate spellcorrect!

:teasing-neener: :teasing-tease: :laughing-rolling: 8-} :D

More runs today had a bit of puking earlier but all under control now.

My pc is now leaking like a sprinkler. Was heating up second run when I noticed drips when there should have been no drips. Tried to fix it and made it 100 times worse. I
have wasted heaps of soft solder trying to fix it. Think I will strip the pc and braze it...

Have been using it for months without issue on my pot :angry-banghead:

Just silicone it

or Gaffa-tap it



:laughing-rolling:


Chewie?


darn it! Was going to spam this but it doesn't like it...


I'd lend you mine, but you'd have fixed yours well and truly before I got to you!

Lol all good(especially after a couple whiskey) I will fix it gooood tomorrow.. :handgestures-thumbupleft:

Ifn ya do de-solder things wipe of the exess solder from parts with a damp cotton cloth whilst the solder is still liquid(welding gloves work well here so ya do not burn fingers),will make it easier when ya re-assemble makeing sure every join is clean and emery papered,I like ta wipe down parts with left over spirit at 90-95%abv just ta make sure there is no dirt or grime and find the cleaner things are the easier the job goes.cheers hillzabilly :handgestures-thumbupleft:

Wow, I didn’t realise that it needs to be so ‘sterile’!

Quite amazing

I gave it gentle heat and it went from a small weep to a sprinkler :angry-banghead: so tomorrow I am gunna teach it whos boss with the
Flap disc and map gas and braize it :twisted:

EziTasting wrote:Wow, I didn’t realise that it needs to be so ‘sterile’!

Quite amazing

Doesn’t need to be sterile, alcohol is a solvent so will clean the same as thinners...

I think ya may struggle ta braze with map torch,I could do small jobs but 2inch an over seemed ta be oxy act territory for me,plus I am not sure how brazeing over soft solder joins will go ,only one way ta find out I guess.I will have a skull and wish you luck. :obscene-drinkingchug: cheers hillzabilly :handgestures-thumbupleft:

Yehaa :laughing-rolling: i brazed my rc 4" and it flowed beutifully. Pc is 2" but is in place. I dont know but at very least I will tortue it with extreme heat for leaking on me...Maybe I have now had just enough to drink 8-} :D

White rum straight from a bubbler by far....faaarrrr... is the best un oaked rum I have ever tasted.. just saying...

:D is that a reflection of your previous drinking choice or your prowess as a distilled?!?!? :teasing-neener: