Aussiedistiller, Home Distilling, Moonshine, Home Brew

Easiest to make. Not having to make little cups for each downcommer..fast simple :handgestures-thumbupleft:

Thats as good a reason as any other! :handgestures-thumbupleft:

Ready for a neutral run..

With plenty of head room to spare I see :shock:

Those screw on peepers are the nuts :handgestures-thumbupleft: :handgestures-thumbupleft:

Doubleuj wrote:With plenty of head room to spare I see :shock:

Yep about 75mm lol :laughing-rolling:

Astro wrote:Those screw on peepers are the nuts :handgestures-thumbupleft: :handgestures-thumbupleft:

Yea I like em :happy-partydance:

Looks good mate :handgestures-thumbupleft:

Just a tip, it might be the photo but it looks like she's leaning a bit. If you can get her to stand up straight the reflux will run through your packing better. The lean may cause the reflux to run down the side of the copper and it won't mix with the upcoming vapor or the packing as well. I found that my % wasn't quite as good when I've been lazy and left it on a lean.

Ok yep the stock keg fitting is not square. Not sure how I could straighten I really need a better boiler..it was only ever gunna be a temp boiler..I will see how it performs. Is stacked with scoria stone..

Maybe a real low platform under it with leveling feet.. :think: i reakon a 75mm thick platform under it I would be flat out turning the triclamp nut up top :angry-banghead:

bluc wrote:Maybe a real low platform under it with leveling feet.. :think:

I just bookmarked milkys boiler thread, low adjustable legs. bloody magic

bluc wrote:

Doubleuj wrote:With plenty of head room to spare I see :shock:

Yep about 75mm lol :laughing-rolling:

A whole 75mm? Luxury! I have 5mm to spare when running 4 plates and packed section. :laughing-rolling:

Cheers,
Prof. Green.

Yea is a ripper alright. Personally eyeing off a milk can.. :handgestures-thumbupleft:

Oh, and very nice rig bluc.

Cheers,
Prof.Green.

bluc wrote:Yea is a ripper alright. Personally eyeing off a milk can.. :handgestures-thumbupleft:

The milk can boilers are the shizz! They look so much better in person than in photos.

Cheers,
Prof. Green.

You should only need to put a bit of wood or something under one side of the boiler to level it out. No need for fancy legs :laughing-rolling:

Yea just thinking about it more i reakon if I bang two wedges in one from side and another in front to keep it stable may work :handgestures-thumbupleft: . Proffessor Yea I love it just wish I had more height for two more plates.. :handgestures-thumbupleft:

Now the only question that really matters... How does it perform?

In proccess of straigtening and bracing it hope to run on weekend :handgestures-thumbupleft:

Much better :handgestures-thumbupleft: