by Russ » Sun May 27, 2018 9:37 pm
I had originally thought of doing exactly what you said and slot the existing reducer to form a smaller cone but since then I have looked at tri clamps and the smaller ones are pretty cheap, I had also ordered an extra 2" for an existing reflux column I have on loan from a mate. I was going to get that going first but I will just concentrate on this plated one instead. My plan is to tri clamp the reducer on both ends, with an easy flange on the 2" cap, that way the only extra thing I need is a 2" seal.
3/8 sounds like the go, I'll acquire some of that, I have AC pipe but if I find some hard drawn plumbing stuff at least it will be nice and straight.
I had planned to fix the parrot to the PC and the drain would be handy for that, though I do like the process you are using, even simpler, I like keeping things nice and simple. Might have to ponder it for a while. The great thing about using tri clamps everywhere is I can change things around easily. The 4" ones start getting expensive but 3" and smaller are not too bad.
Last edited by
Russ on Sun May 27, 2018 9:38 pm, edited 2 times in total.