Page 1 of 1

TFFV back to back stripping run

PostPosted: Tue Aug 25, 2020 7:46 pm
by Ned
Just some advice please.
I usuallly only do a stripping run on 43 litres of TTFV into the 50 litre boiler on the 4" Neutraliser
Just wonder what is the best attack for doing 75 litres at a time as I have 75 litres currently fermenting.
I would like to do back to back, so not sure of the logistics. Do I let everything completely cool or just close down after the run, empty the boiler and refill.
Any help would be appreciated Thanks
User avatar
Ned

Posts: 124
Joined: Fri Sep 29, 2017 8:13 am
equipment: 4" 4 Plate Bubbler with 500m packed section/blockhead and 50 litre milk can. Only the best.

Re: TFFV back to back stripping run

PostPosted: Tue Aug 25, 2020 8:39 pm
by wynnum1
What do you do with the waste from the boiler as if put down the drain not good to put hot liquids in drains as could cause problems if have enough and if using a hose to drain may not like the heat.

Re: TFFV back to back stripping run

PostPosted: Tue Aug 25, 2020 9:23 pm
by RC Al
Outside if the drain issue (I pick some weeds to kill), run as soon and hot as you can safely handle things, conserve the energy used to heat everything

If you have a wort chiller coil (? I seem to recollect you being big into AG) consider using it to preheat the next wash with the condenser output - reduce the flow to the pc and (carefully) run it near the edge of overpowering for a nice hot output for the coil

A spare keg or empty fermenters hold hot dunder well too - gets a good cleaning too

Re: TFFV back to back stripping run

PostPosted: Tue Aug 25, 2020 11:20 pm
by Amberale
I usually give the heat elements 5-10 minutes to cool and then drain through a HD 1” garden hose and then 20mm clear-reinforced hose to waste by gravity out the side of the shed.
The reverse heating coil of copper pipe sounds like a great idea especially this time of year.
Just run the waste through a coil in the fresh low wines and then out.

Re: TFFV back to back stripping run

PostPosted: Wed Aug 26, 2020 9:10 pm
by Ned
RC Al wrote:Outside if the drain issue (I pick some weeds to kill), run as soon and hot as you can safely handle things, conserve the energy used to heat everything

If you have a wort chiller coil (? I seem to recollect you being big into AG) consider using it to preheat the next wash with the condenser output - reduce the flow to the pc and (carefully) run it near the edge of overpowering for a nice hot output for the coil

A spare keg or empty fermenters hold hot dunder well too - gets a good cleaning too


Great memory, unfortunately its not an imersion chiller its a counter flow chiller, but food for thought.
Its a shame top waste all that energy.

Cheers

Re: TFFV back to back stripping run

PostPosted: Wed Aug 26, 2020 9:12 pm
by Ned
wynnum1 wrote:What do you do with the waste from the boiler as if put down the drain not good to put hot liquids in drains as could cause problems if have enough and if using a hose to drain may not like the heat.


Not down the drain. Put into buckts and when cool, pour onto the lawn.
Has not done it any harm.
I think somementioned use it as a weed killer, when hot. Great Idea

Re: TFFV back to back stripping run

PostPosted: Wed Aug 26, 2020 9:14 pm
by Ned
Amberale wrote:I usually give the heat elements 5-10 minutes to cool and then drain through a HD 1” garden hose and then 20mm clear-reinforced hose to waste by gravity out the side of the shed.
The reverse heating coil of copper pipe sounds like a great idea especially this time of year.
Just run the waste through a coil in the fresh low wines and then out.


Yes great idea by RC Al

Re: TFFV back to back stripping run

PostPosted: Wed Aug 26, 2020 10:07 pm
by RC Al
Ned wrote:Great memory, unfortunately its not an imersion chiller its a counter flow chiller, but food for thought.
Its a shame top waste all that energy.

Nah, you Auto-malter is your avatar pic, its a pretty cool machine and hard to forget
Ned wrote:Yes great idea by RC Al

Certainly not my idea, 100% stolen from elsewhere lols

Re: TFFV back to back stripping run

PostPosted: Thu Aug 27, 2020 10:13 am
by scythe
I think it might have been from the fuck-up thread.
I seem to remember one member pouring hot dunder out near their fence post and it killed the grass.

Re: TFFV back to back stripping run

PostPosted: Fri Aug 28, 2020 8:40 am
by Ned
RC Al wrote:
Ned wrote:Great memory, unfortunately its not an imersion chiller its a counter flow chiller, but food for thought.
Its a shame top waste all that energy.

Nah, you Auto-malter is your avatar pic, its a pretty cool machine and hard to forget
Ned wrote:Yes great idea by RC Al

Certainly not my idea, 100% stolen from elsewhere lols


Thanks. Thats the Mark II, just update with a variable speed 12volt motor. (Less pulleys gone from 4 to 2) I can now also wash out the drum and drain it

Re: TFFV back to back stripping run

PostPosted: Fri Aug 28, 2020 8:44 am
by Ned
scythe wrote:I think it might have been from the fuck-up thread.
I seem to remember one member pouring hot dunder out near their fence post and it killed the grass.


I keep that in mind when I want to poison some grass, good excuse to distill :text-lol:
If I get asked what are you doing mate ? I say making some dunder to poison my grass :text-lol: :text-lol:

Re: TFFV back to back stripping run

PostPosted: Fri Aug 28, 2020 12:24 pm
by Wellsy
Ned I would be less specific mate surely “gardening” would be enough to get you a day pass

Re: TFFV back to back stripping run

PostPosted: Tue Sep 01, 2020 8:15 pm
by Ned
:text-+1:
Wellsy wrote:Ned I would be less specific mate surely “gardening” would be enough to get you a day pass