ticknaylor wrote:So I'm gunna put off the plate tree till I sort out what to do with the with downcomers and cups. So I thought I'd build the product condenser which will be 2" with 4 1/2" pipes 500mm long. Wondering if anyone could help.....
1) Put each of the 1/2" pipes halfway between centre of pipe and edge of plate 90 degrees to each other?
2) Input and out put pipes for water supply anysize preferable I know I need to solder a screw fitting for water but not sure what size pipe?
3) Do I need a third plate in middle to stop pipes touch I thought this would impede the flow of cooling water upwards in the condenser
4) anything I'm missing here
Any help would be awesome I f*cked around all last night on HD looking for templates and build examples its just to big the HD google search just leads ya on a wild goose chase through a lot of bollocks looking for the helpful stuff like I couldn't even get it to find olddogs MK2 flute build because so many f*&ckers quoted it in other posts :angry-banghead:
ticknaylor wrote:Cheers yummyrum your right mate I been stalling because I wanna make this build awesome, time to get out the torch and just do it. cheers for the kick up the arse :handgestures-thumbupleft: Cheers Mr E i'll look at macs old ones I'm pretty sure I studied em all on here just BT1 made me think about different designs with his foot idea so I thought more research was in order to achieve the best design. Personally mate I don't want to be spoon fed I'd rather make up my mind from comparing information and working out the best way unfortunately HD has to much information and its not archived correctly so you can waste hours sorting through shite
Cheers NT
ticknaylor wrote: Personally mate I don't want to be spoon fed I'd rather make up my mind from comparing information and working out the best way unfortunately HD has to much information and its not archived correctly so you can waste hours sorting through shite
Cheers NT
So can I just use a 20mm section of 1inch soldered to the plate as cups
McStill wrote:The way I see it, you go looking for info and on your journey to find that your inadvertently finding other info, and learning great stuff along the way :handgestures-thumbupleft:So can I just use a 20mm section of 1inch soldered to the plate as cups
Exactly how the first two pics are done, good pick up :handgestures-thumbupleft:
Return to Plated Column Stills
Users browsing this forum: No registered users and 92 guests