Linno's got a Five Star Bubbler

[bt1]

Nice,

They do look good all setup and running don't they.

gee that shed's a nice size..I got a tool shed (box) I can piss from wall to wall end to end.

bt1

[BackyardBrewer]

Great pix & vid, so nice to see one running. I'd love to see the set up before the boil next time (water to condensers /keg fill etc)

[Haymo]

I got mine to linno fucken unreal gear hey :handgestures-thumbupleft: can I come see your mrs too :O)

[dyna-mo]

That has come up a treat mate - very sexy!! :text-coolphotos:

[Linno]

well fellas

time to dust the cobwebs off this thread cause i have just got my FSD ext Kit from Mac for my FSD 4 plate bubbler :happy-partydance: , some copper scrubbers and 80lts of TPW to experiment with....

heres some some pics of it set up and waiting for temp.... i will make a vid and add that later.. :music-deathmetal:

[MacStill]

Looks great Linno, lucky you got a high roof in there :laughing-rolling:

So how was the run ?

[Brendan]

Holy fermenters Batman!

[Cane Toad]

Wow :scared-eek: those sight glasses and tee's look huge :D :D :D

[Linno]

Hey mac the run is still going and not showing signs
Of fading I use 350 ml jars and have got 16 jars so far plus 500 ml
I turf at the start. Just gone down to 94.5percent from 95.5 :music-deathmetal:

[Brendan]

Just as a guide, I'm assuming you're running 80L of TPW wash in the one run?

I ran 120L of All Bran Wheat Flakes wash stripped down to 40L of low wines through my 6 plate bubbler + 500mm copper mesh packed section...and the run took about 6 hours...collected about 9L @ 96% :handgestures-thumbupleft:

If you've got 80L of 10%ABV wash, I'd be guessing 4 hours should see everything worthy of neutral coming out.

[Ryno]

Great setup Linno :handgestures-thumbupleft:

How do find using the temp gauge above the RC?. Do you use it much?

[1 2many]

Great setup Linno :handgestures-thumbupleft:

How do find using the temp gauge above the RC?. Do you use it much?

Good question , i would like to know thoughts on that one too. :think:

[blond.chap]

Great setup Linno :handgestures-thumbupleft:

How do find using the temp gauge above the RC?. Do you use it much?

I'm not linno, but I use my thermometer above the RC. It's most convenient to work out when you should start taking tails, as it jumps quite quickly from around 79 to 80+. Along with the plates drying up it really makes it easy to work out when the run is finished.

[MacStill]

Temp guages suck :teasing-tease:

[Linno]

Hey guys

Yeah blonde chap lFirst time I done run this but yeah it was 80 lt in one
Run got 5.2 lt 95 percent to keep I had four jars heads and
1 jar tails before I switched off. The cut offs between jars heads and tails
were Very easy to tell I had 2 mates here to check for sniff test and it was too easy.
I found that unlike other rum or bwko runs it was 95 percent down to 90 percent. The FSD
Ext packed was a treat. I used to strip run with a pot and then reflux
But this is the best way to make neutral without doubt.

Temp gauges don't suk :teasing-neener: mine jump from 78 to 80 right at the
Onset of tails within one jar. Same as I get from bwko or rum wash

[Mfkerg]

Oh man the FSD bubblers look amazing, I makes my simple pot and Boka look inadequate. Must save the pennies and get into one of these but keep practicing.

I hope you guys aren't all compensating for something :teasing-neener: but I think it is closer to the fact that I am jealous.

Great pics Linno

[Brendan]

I hope you guys aren't all compensating for something :teasing-neener:

Who cares when you've got a rig like that! :teasing-neener:

[Ryno]

Thanks Blond.chap and Linno good information :handgestures-thumbupleft: