Bushy's Bubbler Build

[ticknaylor]

Another stupid question but how does the whole plate assembly sit in there? , does the j cup rest on the inside of the reducer? :think:

Mine has flattened 6mm copper with a hole which the threaded rod sits in which is a complete waste of time because one you slam a 5 plate tree it aint goin nowhere

[Bushy]

Another stupid question but how does the whole plate assembly sit in there? , does the j cup rest on the inside of the reducer? :think:

This is how i've done it.

2013-09-30_05-39-22_515.jpg

The crosspiece nestles into the reducer. Also soldered a ring into my rock section at the right height because I run with the rocks underneath when doin a neutral.
Note the free floating cup section :-B

[stretch69]

Okay thanks mate