Glasser build

[bayshine]

Yep :handgestures-thumbupleft: I've got wood :laughing-rolling:

[wiifm]

Looks fantastic! :handgestures-thumbupleft:

[Woodsy71]

Very sexy shit there mate 8-)

[punchy21]

That looks shit hot so far mate :handgestures-thumbupleft:

[Yummyrum]

Very nice ...5 rods and the circular plates are a nice touch.....breaks up the clinical look.

I do like glass :angry-banghead:

[kickarum]

Looking good Huggy and progressing quickly.
Are they the glasses Mac was referring to in his earlier post? Or did you stick with the Primus glasses?
Cheers Mick.

[huggy_b]

Cheers everyone, it's certainly upped the motivation to finish it quick seeing it partially assembled. I'm glad we went bubble caps in the end, it's sped up the build considerably!

Looking good Huggy and progressing quickly.
Are they the glasses Mac was referring to in his earlier post?
Cheers Mick.

Nah, they are just the large Primus lantern glasses.

[MacStill]

Looking good Huggy and progressing quickly.
Are they the glasses Mac was referring to in his earlier post? Or did you stick with the Primus glasses?
Cheers Mick.

Cheers for the reminder, they must be due soon... I'll check up on em now :text-thankyoublue:

[huggy_b]

So a few more bits fabricated and its starting to look like a little more complete! Our joiner / gin basket is now done, easy flanges added and to be a bit fancy my mate has tig welded them.......I think he is going to run some silver solder over the joins just in case there are any pinholes!






This weekend will be condensers and a new parrot, pick a few clamps/seals from Mac then we should be ready for a vinegar run. We have a 200L second gen UJSM and 200L of TPW waiting in the wings for when we are ready to christen it. Cleaning run might be a bunch of xmas booze I have that I'll never drink....... :laughing-rolling:

[Kimbo]

Lookin very nice mate :handgestures-thumbupleft:

[Yummyrum]

That's a really top notch job huggy-b ....I do like glass stills :happy-partydance:

[Sinerjee]

That's a really top notch job huggy-b ....I do like glass stills :happy-partydance:

So is that a modification coming to your build then :))

[1 2many]

:text-coolphotos: Fantastic work huggy_b...I like the copper tig job I can't recall ever seeing one, great build and keep the pics coming :handgestures-thumbupleft:

[Bushy]

Looks great mate. Nice work.
These glassers are startin to pique my interest.

[Linny]

That thing looks bloody sweet, i did mine in SS because i had the idea that they were weak ,,,, but you my friend have changed my mind

[Muppet]

Noice wrk Huggy, very noice. See ya over at the bullet ;)

[huggy_b]

Noice wrk Huggy, very noice. See ya over at the bullet ;)

If I ever get the bloody car running! Haha, bloody drag cars - not sure why I started......

[BackInBlack]

Fantastic build ^:)^

[huggy_b]

Well our glasser is now complete, we still have to make a 500mm packed section but we have what we need to get going on our vinegar clean, sacrificial wine run and then finally our 2nd generation 200L of sour mash. We are all three car guys, so it was only natural to use dash fittings on our cooling system :))

We've named our still "2 buck Betty" - we needed something to fit the rubber feet and a 50c piece was perfect. 4 feet x 50c = $2.......




And here she is in all her glory. Sunday is go day......can't wait :-D

[timboss]

Looks great!

Speedflow fitting fittings finish it it off real nice too. :handgestures-thumbupleft: