Building a shotty PC, tutorial video

Posts in this forum should be a complete method, educational, with pics where applicable,posts made in this area that don't fit this criteria will be moved at mods discretion.

Building a shotty PC, tutorial video

Postby woodduck » Sun Oct 29, 2017 8:29 am

While I was building my PC the other day I thought I'd have the camera running and show you blokes how I build them. It might be helpful for anyone thinking of building one.

There's 3 videos all up, an intro/part 1, finishing off/part 2 and one on how to draw and make the end plates. About 40 mins all up. They might be a little long but I thought it was important to show how long it takes to solder stuff up so to know if your traveling ok and it can take a while.

First up I would like to thank this forum for it's massive knowlage resorce that allowed me to start building stuff like this. If it wasn't for the great blokes here posting their trade secrets, especially Mac, I would never have built any still. This tutorial is nothing new, I learnt it from mac's thread here http://www.aussiedistiller.com.au/viewt ... =41&t=3087
I just put it in a vid and just hope I did it justice.

Some things I should mention are,
If your doing the easy flange, solder the ring on before the end plate.
Cut your plates bigger than needed with tin snips them use a grinder/file to get them to a neat fit.
This method will work on 2,4 and 6" pipe maybe others and is the same for building RCs aswell.
If your holes and or plates are too small just hammer around the hole or edge to spread the plate to size.

Thats about it for now any questions let me know :handgestures-thumbupleft:

https://youtu.be/4aZ4Ls2_gL8

https://youtu.be/KAMMfUmP-Qc

https://youtu.be/QfI6A-JnSK8
woodduck
Moderator
 
Posts: 2846
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Building a shotty PC, tutorial video

Postby EziTasting » Sun Oct 29, 2017 3:16 pm

Watched 2 and am waiting to get into #3 (Dads' taxi time). Love it, no BS very human and easy enough to follow... not that I will in the near future - too many projects ... something about a pool?!?! :teasing-tease:

Keep it up - we need more of these! Everyone...
EziTasting
 
Posts: 1838
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Building a shotty PC, tutorial video

Postby bluc » Sun Oct 29, 2017 5:05 pm

EziTasting wrote: too many projects ... something about a pool?!?! :teasing-tease:

You mean a water recirculation pond :handgestures-thumbupleft: :laughing-rolling:
bluc
 
Posts: 5736
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Building a shotty PC, tutorial video

Postby EziTasting » Sun Oct 29, 2017 5:09 pm

bluc wrote:
EziTasting wrote: too many projects ... something about a pool?!?! :teasing-tease:

You mean a water recirculation pond :handgestures-thumbupleft: :laughing-rolling:


Hehe looks like the pool just jumped the que... :laughing-rolling:
EziTasting
 
Posts: 1838
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Building a shotty PC, tutorial video

Postby woodduck » Tue Nov 14, 2017 3:36 pm

Sorry guys I was ment to post this a while ago but forgot.

For those wanting to do a 2", I put 5 1/2" tubes in. One in the centre then 4 on a radius of 16mm.
You do not have the required permissions to view the files attached to this post.
woodduck
Moderator
 
Posts: 2846
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Building a shotty PC, tutorial video

Postby woodduck » Tue Nov 06, 2018 4:49 pm

I thought that since there are a few members thinking of building lately that these video's may be of use so I've moved them out here to the open forum for all to enjoy :handgestures-thumbupleft:

Happy building
woodduck
Moderator
 
Posts: 2846
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.


Return to Tips From The Workbench



Who is online

Users browsing this forum: No registered users and 1 guest

x