5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchI think I've finally clued onto how to soft-solder...so I knocked these up....
had a go at a novel way to make a parrot from the bits I had lying round.
Poor missus had to put up with me waving em under her nose in my pride...lol
kinda a joke when you look at what most here have been able to put together, but have to start somewhere!
Novel parrot
3 posts
• Page 1 of 1
Novel parrot
by Darwin award » Mon Oct 26, 2015 5:26 pm
You do not have the required permissions to view the files attached to this post.
- Darwin award
- Site Donor
- Posts: 318
- Joined: Sun Jun 21, 2015 10:57 am
- equipment: Reflux still 1x store bought 1x home made copper 1 x eBay pot still....1 FSD Neutralizer set up and happy in it's new home
Re: Novel parrot
by scythe » Mon Oct 26, 2015 7:05 pm
As long as that larger tube is 1" it should be fine, if a little short.
You need a bit of room for the spirit to flow around the alchometer.
You need a bit of room for the spirit to flow around the alchometer.
- scythe
- Posts: 1860
- Joined: Thu Nov 14, 2013 6:34 am
- Location: Central West NSW
- equipment: Dreaming of a 4" bubbler
Re: Novel parrot
by Darwin award » Mon Oct 26, 2015 8:23 pm
scythe wrote:As long as that larger tube is 1" it should be fine, if a little short.
You need a bit of room for the spirit to flow around the alchometer.
Yeah, checked that first, pleanty of room round the Alcometer..just don't know if I'm ever going to use it...
Neutraliser from FSD has a parrot attached I believe and the deposit has been paid :dance:
- Darwin award
- Site Donor
- Posts: 318
- Joined: Sun Jun 21, 2015 10:57 am
- equipment: Reflux still 1x store bought 1x home made copper 1 x eBay pot still....1 FSD Neutralizer set up and happy in it's new home
3 posts
• Page 1 of 1
Return to Tips From The Workbench
Who is online
Users browsing this forum: No registered users and 8 guests