Aussiedistiller, Home Distilling, Moonshine, Home Brew

I think I've finally clued onto how to soft-solder...so I knocked these up....
had a go at a novel way to make a parrot from the bits I had lying round.
Poor missus had to put up with me waving em under her nose in my pride...lol
kinda a joke when you look at what most here have been able to put together, but have to start somewhere!

As long as that larger tube is 1" it should be fine, if a little short.
You need a bit of room for the spirit to flow around the alchometer.

scythe wrote:As long as that larger tube is 1" it should be fine, if a little short.
You need a bit of room for the spirit to flow around the alchometer.

Yeah, checked that first, pleanty of room round the Alcometer..just don't know if I'm ever going to use it...
Neutraliser from FSD has a parrot attached I believe and the deposit has been paid :dance: