5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchbrazing stainless to stainless
3 posts
• Page 1 of 1
brazing stainless to stainless
by bluc » Mon Nov 02, 2015 9:33 am
Wondering if anyone can tell me what to use to use to braze some stainless over centre clips onto a stainless stock pot? Want the clips to hold the lid down. So will be "hard solder?" stainless to stainless...
- bluc
- Site Donor
- Posts: 8968
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
Re: brazing stainless to stainless
by Shiftynev » Mon Nov 02, 2015 11:41 am
Hi Bluc,
There's a section on the "Tip from the workbench" section that may help. It's at viewtopic.php?f=41&t=2133 ands includes a clip on soldering stainless to stainless,https://www.youtube.com/watch?v=LIkvP55UbxM. Hope this helps.
Cheers
There's a section on the "Tip from the workbench" section that may help. It's at viewtopic.php?f=41&t=2133 ands includes a clip on soldering stainless to stainless,https://www.youtube.com/watch?v=LIkvP55UbxM. Hope this helps.
Cheers
- Shiftynev
- Posts: 101
- Joined: Mon Aug 04, 2014 7:58 pm
- Location: Melbourne
- equipment: 5 plate, 4" glass bubbler, 600mm packed section, 2"Pot, 2" Boka, 50ltr Keg boiler 2x2400w elements with voltage controller
Re: brazing stainless to stainless
by bluc » Mon Nov 02, 2015 12:05 pm
Thanks looks like he used harris stay clean flux will try and track some down thanks :handgestures-thumbupleft:
- bluc
- Site Donor
- Posts: 8968
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
3 posts
• Page 1 of 1
Return to Tips From The Workbench
Who is online
Users browsing this forum: No registered users and 11 guests