Ainzy's Gear

Perforated & bubble cap plated columns

Re: My mostlyish finished boiler

Postby RC Al » Fri Sep 06, 2019 10:19 am

Nice mate

Not much to go wrong with all that stainless in the water section, should last a life time :handgestures-thumbupleft:

Are you able to use both bottles at once with that set up?
RC Al
Mentor
 
Posts: 874
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: Old SS Reflux
2" Potty on 50l keg Uber burner

Re: My mostlyish finished boiler

Postby ainzy » Fri Sep 06, 2019 10:56 am

Yeah mate. I really didn't plan on running both at once it's more a way that if a cylinder is 1/4 full i can use ot up and swap over on the run... or incase i F up and forget to get a full cylinder i can use what i got whilst the misso zips down the servo
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby ainzy » Tue Oct 29, 2019 12:20 pm

Got the formwork for my tank stand done
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby ainzy » Tue Oct 29, 2019 12:21 pm

Deflag drain and temp gauge
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby Jezza93 » Sat Nov 02, 2019 11:54 pm

Looking good and loving the shiny stainless fittings :handgestures-thumbupleft: :laughing-rolling:
Jezza93
 
Posts: 73
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: My mostlyish finished boiler

Postby ainzy » Sun Nov 10, 2019 5:25 pm

Tankstand slab poured
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby bluc » Sun Nov 10, 2019 6:09 pm

Sweeet :handgestures-thumbupleft:
bluc
 
Posts: 7304
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: My mostlyish finished boiler

Postby ainzy » Tue Dec 24, 2019 10:09 am

How my stuff sits now sac run is fermenting now
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby ainzy » Tue Dec 24, 2019 10:10 am

Is there any chance someone with the knowhow would be kind enough to move this from the boiler section to the plate still section
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby ainzy » Tue Dec 24, 2019 10:16 am

First real wash to go through will be a bastardized hybrid of barley sweetfeed and cracked corn ( its all the local produce shop had) done ujssm style
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: My mostlyish finished boiler

Postby ainzy » Tue Dec 24, 2019 10:20 am

Ive been working on a rims/preheat controller and this is it. Im hopeing that i can use and my march pump to set a preheat temp and start the boiler preheating so i dont have to watch the gas all day.. i would of gone full electric but the mains supply in my area is shitty
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby ainzy » Sat Dec 28, 2019 2:15 pm

This is how ive got my cooling recirc system done.. it works i ran a cleaning run yesterday and it didn't fault. Was really surprised how little ammount of water the RC needs to control the reflux
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby ainzy » Thu Jan 02, 2020 10:53 am

Tigged up a RIMS tube yesterday. Special thanks to JD who modified the tri clamps for me. I would of test ran it all but my marsh pump shit itself
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby scythe » Thu Jan 02, 2020 5:16 pm

Looks Good,
In what way did you modify the clamps?
scythe
 
Posts: 1688
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

Re: Ainzy's Gear

Postby Jezza93 » Thu Jan 02, 2020 7:40 pm

Just made them slip on flanges so can weld the inside so there no grove for nasty to grow in as well machine half the threads out for the element side and drilled some holes :handgestures-thumbupleft: :clap: :happy-partydance:

Looking good Ainzys ^:)^ :music-deathmetal:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 73
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Ainzy's Gear

Postby ainzy » Thu Apr 09, 2020 5:33 pm

Overview of rims system shake down
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby ainzy » Thu Apr 09, 2020 5:34 pm

Inspired buy grandfather sparge/recirc arm
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby ainzy » Thu Apr 09, 2020 5:35 pm

DIY false bottom
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Re: Ainzy's Gear

Postby ainzy » Thu Apr 09, 2020 5:35 pm

DIY controller
You do not have the required permissions to view the files attached to this post.
ainzy
 
Posts: 47
Joined: Thu Feb 18, 2016 7:25 am
equipment: 25L store bought 2" pure reflux with coloum extension
50L gas powered keg boiler
2" stainless pot/stripper
4" neutraliser
Custom built 180L SS boiler
50L keggle recirc mash tun
DIY rims tube and controller

Previous

Return to Plated Column Stills



Who is online

Users browsing this forum: No registered users and 13 guests

x