Page 1 of 3
my boiler insulation
Posted:
Thu Jun 07, 2018 1:03 pm
by Doubleuj
Finally finished my boiler shroud for my 100L FSD boiler.. :happy-partydance:
89B5928A-4F42-45D9-A152-F933C9CBF03A.jpeg
Inside the timber barrel is vermiculite so the insulation factor is expected to be through the roof!!!
Plus I added a 4” fill port, bottom drain and a third element :scared-eek:
So it’s got 2x 2400w and 1 x 3600w elements :music-deathmetal:
That’s 8400w up it’s bum :laughing-rolling:
Doing the maiden sac run now with a full 100L , turned it on at 12:55pm.
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 1:09 pm
by bluc
Awesome work need another photo with some light on the situation. Did you take it to metal shop to add ports or diy?
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 1:20 pm
by Doubleuj
DCABC987-D6F1-49E9-B567-96B34F4E4048.jpeg
Hopefully that’s a bit clearer
I got a mate to tig up the fill port etc, cost me a carton which I helped drink :laughing-rolling:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 2:04 pm
by Sam.
That truly is a thing of beauty ^:)^
Bet it won't take long to come up to temp :D
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 2:12 pm
by Doubleuj
Already there :laughing-rolling:
1 hr and 10mins and we have bubbles !!!
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 2:54 pm
by bluc
Much better awesome work :clap:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 3:19 pm
by woodduck
That is one beautiful boiler mate ^:)^ ^:)^ ^:)^
No more sitting around waiting for boil :laughing-rolling:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 3:29 pm
by db1979
8400? Do you mean 12000 W? Or does it have one 3600 W element?
Either way that's impressive :handgestures-thumbupleft:
Nice looking boiler :clap:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 3:53 pm
by Doubleuj
Yeap only 1 x 3600, that was a typo 8-}
Thanks for your help dB on calculating the angles for the barrel pieces :handgestures-thumbupleft:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 4:17 pm
by bluc
Is it two piece boiler and stand or one piece :think:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 4:18 pm
by Doubleuj
the bottom section is just the stand :handgestures-thumbupleft:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 4:20 pm
by bluc
Is it two piece?
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 4:47 pm
by Doubleuj
Yeap, the top piece slides up over the boiler, after taking the still off.
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 5:01 pm
by bluc
Sweet as :handgestures-thumbupleft:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 5:50 pm
by Doubleuj
3hrs after switching it off the backset is still at 90 deg. That’s with having the fill port open for most of that time :scared-eek:
Vermiculite is the best insulation ever :music-deathmetal:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 6:21 pm
by The Stig
What a thing of beauty :happy-partydance:
You truely are an artist :music-deathmetal:
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 6:25 pm
by Astro
looks good mate, any before or build pics?
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 7:11 pm
by bluc
Did you do your own tig work?
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 7:25 pm
by Professor Green
That is some seriously sexy shizz mate. Nice work indeed.
Cheers,
Prof. Green.
Re: my boiler insulation
Posted:
Thu Jun 07, 2018 7:30 pm
by dans.brew
Doubleuj wrote:Vermiculite is the best insulation ever :music-deathmetal:
Some very nice work there mate!
Sure puts a plain old keg to shame. Your whole setup looks the part now. Just wondering where you got the vermiculite from?