18Gal+ boiler build

Boiler, burner and boiler modification talk.

Re: 18Gal+ boiler build

Postby nuddy » Sun Aug 12, 2018 10:48 pm

Cheers gents, just trying to contribute back to the community that I've learnt so much off. Hats off to everyone that has helped blazed the well worn path I'm now walking down.



Alright, this was a big day today, time was not on my side this weekend but I've managed to get this boiler finished yewwwwwwwww.

First off, got the 50L keg welded to the 80L keg and sitting square and plumb. Pic from the inside showing the weld penetration and excess material I had to trim/flap disc back to get a nice smooth transition between the two kegs. Took a little bit longer than anticipated and ended up making a lot of mess. Welds came out decently without needing to back purge.
Image
Kegs welded together. Starting to see the end of this beast.
Image

2" fill port added and 6" view/access port getting ready to transfer cut lines down.
Image
Cut lines transferred.
Image

Keg end capped and tacked on.
Image

Fine control levelling system, s/s bolts with a captive nut welded to a piece of angle, with another nut welded on the end for more surface area. May end up putting a thin piece of flat bar underneath each levelling bolt if it starts to deform the box section.
Image
Image

Works a treat.
Image

Finally its all finished. Gave it a quick run over with the scotch brite, shiny is better.
Outside getting a basic leak test done, filled to the brim with water. Thankfully no leaks with water, fingers crossed its the same with a more alcoholic liquid inside her.
Image
Image
Image

Image
Image

Reallllly happy how its turned out. Have wired up one element, however ran outta cable. Off to get some more tomorrow, need a few more bolts for the castor wheels, then fit everything onto the boiler and give it a vinegar and then cleaning alc run for good measure.

Huge thanks to everyone following the build so far, a lot of fun building this, a few lessons learnt and only a little blood shed so far.

Shoutout to Bigcam, love ya still mate, its got a lil friend now.

Just need to think of a name for it now...... last boiler/still was nicknamed 'the mistress'. However this one has a bigger ass and a little more wholesome german milkmaid look to it, gonna brainstorm but 'Gretel' has a nice ring to it. Whats everyone think?

For now I'm gonna run the 4" still off it, but a 6" still is very tempting right now. Want to make a few extras for this beauty... will see how fortunate I am with free time in the coming months, so many ideas so little time.
nuddy
 
Posts: 168
Joined: Sat May 14, 2016 2:55 pm
equipment: 2" bokabob
4" blockhead bubbler build in progress

Re: 18Gal+ boiler build

Postby Matt_Pl » Sun Aug 12, 2018 10:53 pm

Certainly a boiler to be proud of mate. It looks amazing. Well Done!
Matt_Pl
 
Posts: 298
Joined: Tue Jul 23, 2013 11:42 pm
Location: Darwin
equipment: 4" FSD Neutraliser, custom made 50 litre SS Keg Boiler powered by 4800 killer wasps.

Re: 18Gal+ boiler build

Postby RC Al » Sun Aug 12, 2018 11:37 pm

Schwing-ading-ding

That's beautiful man

I seem to have missed what type of welder your using?
You haven't mentioned pickling paste?
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: 18Gal+ boiler build

Postby Professor Green » Mon Aug 13, 2018 6:30 am

That is an absolute cracker of a boiler, nice work nuddy.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: 18Gal+ boiler build

Postby Nathan02 » Mon Aug 13, 2018 7:23 am

What an absolute pisser mate well done!
Nathan02
 
Posts: 419
Joined: Mon Sep 11, 2017 7:36 pm
equipment: 6" 4 plate bubbler with optional packed section.

Re: 18Gal+ boiler build

Postby db1979 » Mon Aug 13, 2018 7:59 am

Fantastic mate :handgestures-thumbupleft:

Looks like some kind of droid from star wars. Like a cousin of r2d2. Sorry, letting my inner nerd out.
db1979
 
Posts: 1760
Joined: Sat Dec 29, 2012 3:47 pm
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.

Re: 18Gal+ boiler build

Postby woodduck » Mon Aug 13, 2018 8:07 am

That's definitely something to be proud of mate. It looks a ripper! :handgestures-thumbupleft:

Love the name Gretel, suits her perfectly :handgestures-thumbupleft:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: 18Gal+ boiler build

Postby bluc » Mon Aug 13, 2018 12:21 pm

One heck of a boiler done extremely well :clap:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: 18Gal+ boiler build

Postby tipsy » Mon Aug 13, 2018 3:53 pm

:shock:

:clap: :clap: :clap:
tipsy
 
Posts: 863
Joined: Mon Jun 06, 2011 1:34 pm
Location: South Gippsland, VIC.
equipment: 4" Mac 4 with packed section and gin basket on a 50lt boiler with 2 2400w FSD elements.

Re: 18Gal+ boiler build

Postby nuddy » Mon Aug 13, 2018 4:50 pm

RC Al wrote:Schwing-ading-ding

That's beautiful man

I seem to have missed what type of welder your using?
You haven't mentioned pickling paste?


Welder is an everlast AC/DC 230EX, running with a water cooled torch.
Pickling paste was used on all weld, not sure of exact brand but choke full of hydrofluric and nitric acid, definitely not the nicest stuff to play. Use the PPE when handling everyone.

Thanks everyone, I'm pretty stoked with it as well.
Cheeky lil pic of it with 4 plates on top.
Image

Gave it a vinegar run this arvo and will finish the sacrificial alc. run later in the week. Ran wonderfully.
nuddy
 
Posts: 168
Joined: Sat May 14, 2016 2:55 pm
equipment: 2" bokabob
4" blockhead bubbler build in progress

Re: 18Gal+ boiler build

Postby TasSpirits » Mon Aug 13, 2018 5:31 pm

WOW ^:)^
TasSpirits
 
Posts: 1165
Joined: Sat Jul 26, 2014 7:11 am
Location: Tasmania
equipment: Some FSD Gear as well as some home-made

Re: 18Gal+ boiler build

Postby Plumby » Mon Aug 13, 2018 6:32 pm

Looking at your boiler gives me flashbacks of the urinal at school. Inadvertently looking at someone else's kit and thinking " you lucky bastard " :laughing-rolling:
Seriously though, that's top quality workmanship man, well thought through and put together with great experience. You should be well proud of yourself. :handgestures-thumbupleft:
Plumby
 
Posts: 1175
Joined: Sat Aug 02, 2014 7:19 am
Location: South East Queensland
equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.

Re: 18Gal+ boiler build

Postby dans.brew » Mon Aug 13, 2018 7:03 pm

That's one sexy boiler mate! :music-deathmetal:
You have every right to be proud of that.. some very tidy workmanship right there. :clap:
Just out of curiously, how much does she hold?
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: 18Gal+ boiler build

Postby db1979 » Mon Aug 13, 2018 7:36 pm

Professor Green wrote:Could be a contender to replace Milky's build as members featured build.

:text-+1:
db1979
 
Posts: 1760
Joined: Sat Dec 29, 2012 3:47 pm
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.

Re: 18Gal+ boiler build

Postby nuddy » Tue Aug 14, 2018 8:31 pm

dans.brew wrote:Just out of curiously, how much does she hold?


Going to measure out volume this weekend but a quick back of the napkin calculation I'm guesstimating around 110-115L.
nuddy
 
Posts: 168
Joined: Sat May 14, 2016 2:55 pm
equipment: 2" bokabob
4" blockhead bubbler build in progress

Re: 18Gal+ boiler build

Postby dans.brew » Tue Aug 14, 2018 10:52 pm

Thats a pretty gud size to play with! :dance:
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: 18Gal+ boiler build

Postby nuddy » Wed Aug 15, 2018 8:33 am

dans.brew wrote:Thats a pretty gud size to play with! :dance:

I know, aiming for 80L wash fills and give the rum some head room to do it’s little dance.
nuddy
 
Posts: 168
Joined: Sat May 14, 2016 2:55 pm
equipment: 2" bokabob
4" blockhead bubbler build in progress

Re: 18Gal+ boiler build

Postby dogbreath vodka » Wed Aug 15, 2018 3:49 pm

That's a slick bit of kit.
:handgestures-thumbupleft: :handgestures-thumbupleft:
dogbreath vodka
 
Posts: 1396
Joined: Sun Jan 15, 2012 5:10 pm
Location: Somewhere over the rainbow
equipment: "Steampunk 2 - 6" Bubble cap
"Jimmy" the 4" Carter head

Re: 18Gal+ boiler build

Postby dans.brew » Wed Aug 15, 2018 4:45 pm

nuddy wrote:
dans.brew wrote:Thats a pretty gud size to play with! :dance:

I know, aiming for 80L wash fills and give the rum some head room to do it’s little dance.

Yep... you would get nearly as much with one pass as i did doing 4 strip runs and then a spirit run with my trusty old pot and 30ltr boiler!
Just a little quicker... :laughing-rolling:
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: 18Gal+ boiler build

Postby bigcam » Wed Aug 15, 2018 8:31 pm

nuddy wrote:Shoutout to Bigcam, love ya still mate, its got a lil friend now.


funny thing i had a 50lt all ready to go then got the18gal andthen got thinking outside the box and it turned out the way it did :handgestures-thumbupleft: allot more stuffing around sinking the 50 in and the fill port but what the heck :angry-banghead:

i would polish mine but i run on gas 8-} :laughing-rolling: saves having to polish and it stays out doors all the time might do one day when i go with the electric

you will need a thumper now :laughing-rolling:

cheers cam
bigcam
 
Posts: 88
Joined: Tue Jan 07, 2014 3:01 pm
Location: Tassie
equipment: upgraded 110lt gas fired boiler
24lt inline thumper
4 inch x 4 plate with 4 inch shotty with parrot

PreviousNext

Return to Boilers & burners.



Who is online

Users browsing this forum: No registered users and 26 guests

x