So researching how i'm going to build my first boiler, here's what i'm thinking,
I already have the 50l keg,
6 inch triclamp still mount, this gives me greater access to the inside and i can reduce down to suit the still (pot) probably a fsd modular.
4 in sightglass, cause why not. :))
Should i put a thermometer in the boiler? and does that need to go in a thermowell?
1.5 in drain in the bottom.
now electric elements........i keep reading that the fsd versions are the best, can i use a single 3600w unit for a 50l keg? Bearing in mind i have a 15amp circut here can you recommend a controller for it? as the fsd version is only rated to 10a
I know people are going to tell me just to get the fsd milk can boiler, but the budget doesn't stretch that far.......
Cheers