Page 1 of 1

Black insulated keg as boiler

PostPosted: Fri Oct 09, 2020 7:58 pm
by RC Al
Got onto a couple of these, mine are a bit rattier, but look the same

Has anyone had issues with the black stuff melting from a couple of 2200w elments mounted in one?

I doubt its an issue, but you know...

Re: Black insulated keg as boiler

PostPosted: Fri Oct 09, 2020 8:12 pm
by bigcam
probably not a good idea :?

Re: Black insulated keg as boiler

PostPosted: Mon Oct 12, 2020 6:34 am
by Doubleuj
What is the black stuff? Rubber?
If it is rubber I reckon it would be ok, :think: the wash will never get above 100 deg and it’s only on the outside

Re: Black insulated keg as boiler

PostPosted: Mon Oct 12, 2020 9:22 am
by wynnum1
Not an open flame so probably be OK but may start to decompose over time from heat and start to break up.
Could possibly use more insulation to save electricity.

Re: Black insulated keg as boiler

PostPosted: Mon Oct 12, 2020 1:39 pm
by The Stig
Welding ferrules on will be a bitch

Re: Black insulated keg as boiler

PostPosted: Mon Oct 12, 2020 2:00 pm
by wynnum1
The Stig wrote:Welding ferrules on will be a bitch

Probably need to get blasted off with some type of sand blasting media to get a workable area to weld.

Re: Black insulated keg as boiler

PostPosted: Mon Oct 12, 2020 5:54 pm
by RC Al
Thanks guys

I was hoping for a "used one for years" reply

Was only planning on 2x bolt in elements, so no welding

This is for a good friend who is a newby, so for the sake of an unknown risk, ill pass on possibly burning his house down and save it for storage or later experiments in my outdoor use area for now :handgestures-thumbupleft: