gas burner 4 100l boiler

[bear74]

can anyone share a link for or reccomend a gas burner that will get a 100L boiler cranking! i just tried a rambo on 20L and it was rolling boil in 30 mins which is to slow! i need the boiler sorted before i can finalise my order with mac!
bear

[kelbygreen]

you obviously dont have a HP reg. You need a HP reg to use a rambo and it is about as good as you will get. Not sure why you want to heat up so fast as you will have all that built up heat in the metal so when you hit temp and turn it down it will continue to heat till it equalizes.

A 36 jet mongolian burner on HP might be faster but doubt it.

I use a 3 ring burner and with 30 lts of wash it takes 20-30mins to first drops and then runs on the middle and center ring for stripping run at like 7lt/ph and spirit the middle ring about 3/4 on. So a rambo should be way overkill for 100lt boils. I seen people with 200lt pots with a open top boil hard with them for AG beer

[Cane Toad]

I use the BD747 to heat up 200l batches :D :D and it takes about 45 minutes to bring it to the boil :D :D Won't get much quicker I'd say

[bear74]

cheers, i have the hp reg with the rambo maybe doin it outdoors probaly wasnt goin to do it justice! will put it under the boiler and see how long it takes!

[Camikaze]

Hows 5.14 million BTU sound then?

ModularRig_Big1.jpg

:D :D

[crow]

:-o Now that just fucking crazy man, going in to the smeltering business are ya :icon-lol: :icon-lol: :icon-lol:

[Kimbo]

Looks like Stargate :happy-partydance:

[bt1]

Howdy,

Note of awareness with Mongolians. I've both 23 and 32 models.

Unless you run them from about 1/2 flow upward to full they soot badly. A Mongolian on 1/3 open with a HP is messy bloody thing at best.

bt1

[Sam.]

Howdy,

Note of awareness with Mongolians. I've both 23 and 32 models.

Unless you run them from about 1/2 flow upward to full they soot badly. A Mongolian on 1/3 open with a HP is messy bloody thing at best.

bt1

I don't think its too much of an issue, just turn the bastard upside down and blow it off with hose :handgestures-thumbupleft: