Aussiedistiller, Home Distilling, Moonshine, Home Brew

Looks bloody good mate.

MacStill wrote:you could pickle those welds with acetone mate, just give them a good wire brushing first :handgestures-thumbupleft:

Thanks Mac will give that ago first up i have a bottle that handy , just need a couple of ss toothbrushes to go over the welds.

Top stuff 1 2 M

:handgestures-thumbupleft: :handgestures-thumbupleft: :handgestures-thumbupleft:

It'll be in service reaaaal soon I predict.
:D

DBV

Getting very close now. C'mon 1 2, get that baby workin for ya.

Unfortunately the leak test wasn't a complete success both the 4" and 3" SSg sealed up no leaks then turned the 1/2 full keg upside down and both element guard ferules have a pin prick size hole that lets out a drip every 10 or so seconds . :crying-blue:

Have to take it back monday for a touch up :angry-banghead:

Belt the holes with a punch and hammer, could be the answer

run the bloody thing already, dont let little things stop you....... hook in :angry-banghead:

This thread is a crack up i love it!! This is what its all about. I couldnt of done what i did without this forum and my purchase from fsd, now im TRYING to build alittle project of me own. keep at it 1 2 looken good olmate, cut once measure twice son :handgestures-thumbupleft:

MacStill wrote:Belt the holes with a punch and hammer, could be the answer

run the bloody thing already, dont let little things stop you....... hook in :angry-banghead:

The good people in the west seem to be very impatient :teasing-neener:

Maybe. But you are completely fuckin the dog. Run ya flamin still already.

1 2many wrote:

MacStill wrote:Belt the holes with a punch and hammer, could be the answer

run the bloody thing already, dont let little things stop you....... hook in :angry-banghead:

The good people in the west seem to be very impatient :teasing-neener:

No... we've just heard 1 2many excuses for NOT RUNNING THIS BLOODY STILL! :laughing-rolling: :laughing-rolling:

Kimbo wrote:

1 2many wrote:

MacStill wrote:Belt the holes with a punch and hammer, could be the answer

run the bloody thing already, dont let little things stop you....... hook in :angry-banghead:

The good people in the west seem to be very impatient :teasing-neener:

No... we've just heard 1 2many excuses for NOT RUNNING THIS BLOODY STILL! :laughing-rolling: :laughing-rolling:

Yet another westie :teasing-tease: :laughing-rolling: :laughing-rolling:

Took boiler back to get a touch up weld one the leak so all fixed and he even gave me some pickling paste to clean up the welds worked great , i went a bit over board with the paste and partialey dulled a couple of FSD ferules :scared-eek:
That I will have to polish up again but that will be down the track . :shifty:

So it looks like I can run the still this weekend :handgestures-thumbupleft:

You beauty!!! Looking forward to the results :dance:

1 2many wrote:So it looks like I can run the still this weekend :handgestures-thumbupleft:

This weekend. Sensational. Except it's monday today. :think:
Why don't ya send the missus out to bingo and just go freakin crazy and run the fkr tonight or tomorrow night. :music-deathmetal:

Well 12 :whistle:

bayshine wrote:Well 12 :whistle:

He needs eight bricks.

Blockhead is on 6 bricks and as I speak she is getting a vinagar bath. then going to the $2 shop to get some cut jars.

GAME ON :teasing-neener:

Got my cut jars just starting sacrificial alcohol run. :handgestures-thumbupleft:

1 2many wrote:Got my cut jars just starting sacrificial alcohol run. :handgestures-thumbupleft:

Now you can "finally" change your signature :O)

Wow that was cool all went ok but i think i should have plumbed the RC off the pc as the water was to cold and barely had a drop of water going through it. the run started as drops but then went to a tiny stream by itself all plates loaded up nicely .

Now to do the real thing it is a vintage TPW @ 6 months and 19 days old :oops: Better late than never as thay say. :handgestures-thumbupleft: