Turbo Boiler Lid Seal Replacement

Boiler, burner and boiler modification talk.

Turbo Boiler Lid Seal Replacement

Postby Magnus » Mon Aug 24, 2015 4:24 pm

Has anybody ever replaced the silicone seal in the turbo boiler? If so what did you use?

Sorry if this has been asked before but the search function brings up so many hits and I cant find an answer anywhere.
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby Doubleuj » Mon Aug 24, 2015 4:33 pm

Think you can buy them from your hbs, or contact the manufacturer
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Turbo Boiler Lid Seal Replacement

Postby WTDist » Mon Aug 24, 2015 4:34 pm

How much is a new lid. might be easier to rwplace the lid
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: Turbo Boiler Lid Seal Replacement

Postby Magnus » Mon Aug 24, 2015 4:39 pm

WTDist wrote:How much is a new lid. might be easier to rwplace the lid


I plan on doing some tig welding on the lid and I'm worried I'll most likely burn the seal out, thats why I'm looking at maybe needing to replace the seal.
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby Doubleuj » Mon Aug 24, 2015 4:44 pm

Can't get the seal out first?
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Turbo Boiler Lid Seal Replacement

Postby Magnus » Mon Aug 24, 2015 4:49 pm

It seems well glued in , I reckon I'd damage it trying. To be honest I'd like to replace it with something other than silicone too.
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby Doubleuj » Mon Aug 24, 2015 5:03 pm

There's nothing better than silicon mate :handgestures-thumbupleft:
You could try to find a silicon baking sheet that is big enough and cut a new one out but don't do what I did and buy cheapies :angry-banghead: ,spend the $40 or so and get a genuine 100% silicon one.
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Turbo Boiler Lid Seal Replacement

Postby Magnus » Mon Aug 24, 2015 5:46 pm

I tracked down a replacement seal online for $11 plus postage so it's all good. Thanks for the replies :)

As a side note.. I've read a lot about alcohol vapor stripping toxins out of silicone, what's every bodies thoughts on that?
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby P3T3rPan » Wed Aug 26, 2015 6:55 am

Magnus wrote:I tracked down a replacement seal online for $11 plus postage so it's all good. Thanks for the replies :)

As a side note.. I've read a lot about alcohol vapor stripping toxins out of silicone, what's every bodies thoughts on that?

What toxins
Where you read all this
P3T3rPan
 
Posts: 435
Images: 0
Joined: Tue Jun 25, 2013 7:34 am
Location: Wellington NZ
equipment: Self made 100mm copper,6 perforated plates plus packed section on 50L ss keg
60L fermenters. Offset Carter Head
3v beer rig

Re: Turbo Boiler Lid Seal Replacement

Postby CH3CH2OH » Wed Aug 26, 2015 7:06 am

Id be worried about the glue holding it in not the silicone seal!!
CH3CH2OH
 
Posts: 369
Joined: Tue Oct 23, 2012 9:14 am
equipment: 4" copper 7 plate bubbler with packed section on a 50l boiler

Re: Turbo Boiler Lid Seal Replacement

Postby WTDist » Wed Aug 26, 2015 9:34 am

CH3CH2OH wrote:Id be worried about the glue holding it in not the silicone seal!!

:text-+1:
If it has enough pressure just a loose seal should do when clamped in, we don't glue our silicon seals on our flanges ;-)
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: Turbo Boiler Lid Seal Replacement

Postby Magnus » Wed Aug 26, 2015 11:21 am

WTDist wrote:
CH3CH2OH wrote:Id be worried about the glue holding it in not the silicone seal!!

:text-+1:
If it has enough pressure just a loose seal should do when clamped in, we don't glue our silicon seals on our flanges ;-)


I don't know if it is glued in, I certainly didnt glue it in.. It's how it came when I bought it. None the less it's well stuck in place.
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby WTDist » Wed Aug 26, 2015 11:23 am

Ive found black and clear silicon in my T500 when i pulled it apart so maybe it is held in place with this...

I also found plastic and brass :scared-eek:
WTDist
 
Posts: 2
Joined: Sun Oct 05, 2014 11:32 am
Location: Brisbane
equipment: Building a 4" bubbler with 8" glass thumper

Re: Turbo Boiler Lid Seal Replacement

Postby Magnus » Wed Aug 26, 2015 12:13 pm

WTDist wrote:Ive found black and clear silicon in my T500 when i pulled it apart so maybe it is held in place with this...

I also found plastic and brass :scared-eek:


Not good hey, I'm glad I only got the boiler before finding this site.
Magnus
 
Posts: 186
Joined: Sat Jul 25, 2015 6:16 pm
equipment: 3" still

Re: Turbo Boiler Lid Seal Replacement

Postby Gweedo » Mon Aug 31, 2015 9:51 pm

The silicon seal on the lid is not glues in, just wiggle it out. If you damage it you can get a new seal from most HBS that sell the turbo system. ie - One stop bar show, brew craft, ebay etc etc. The seals themselves are only $9.00 - $11.00 and when you replace it, they actually set in the groove at a 45 degree angle. ethanol doesn't strip any toxins from 100% silicon materials
Gweedo
 
Posts: 8
Joined: Wed May 14, 2014 10:41 am
Location: Melbourne, Australia
equipment: just basic garden variety pot still on 25 litre boiler


Return to Boilers & burners.



Who is online

Users browsing this forum: No registered users and 10 guests

x