Aussiedistiller, Home Distilling, Moonshine, Home Brew

warramungas wrote:I'd be worried that it didn't work properly and then I'd have to remove it. I'll stick with the patina look. :handgestures-thumbupleft:

Yea I think I fucked up with the boiler when I clear lacquered the timber I lacquered the brass straps they are turning to shit I can see buffing them back

Test a small piece of scrap copper first :handgestures-thumbupleft:

what with

This is what I used and it's been great. It will scratch but so does copper. I've even re soft soldered some stuff and haven't burnt it off. It doesn't discolor, the copper will under it but you won't stop that anyway.

http://www.whiteknightpaints.com.au/mob ... lear-guard

Aussiedownunder01 wrote:what with

:doh: :wtf: well I don't know that, but what ever you choose you should test on a small sample first :teasing-tease:

If your not in a hurry ill let you know how this goes in a week or so. got some buffing and polishing wheels and some California purple metal polish to test out then coat it with this below, once i buy the clear coat that is

https://www.bunnings.com.au/dulux-duram ... t_p1400741

WTDist wrote:If your not in a hurry ill let you know how this goes in a week or so. got some buffing and polishing wheels and some California purple metal polish to test out then coat it with this below, once i buy the clear coat that is

https://www.bunnings.com.au/dulux-duram ... t_p1400741

Aparantley that wont stand heat
Ended up going to the auto shop and got a can of engine clear

Out with the old and in with the new

Looks awesome :handgestures-thumbupleft:

Aussiedownunder01 wrote:

WTDist wrote:If your not in a hurry ill let you know how this goes in a week or so. got some buffing and polishing wheels and some California purple metal polish to test out then coat it with this below, once i buy the clear coat that is

https://www.bunnings.com.au/dulux-duram ... t_p1400741

Aparantley that wont stand heat
Ended up going to the auto shop and got a can of engine clear

Thx for the heads up. When you say engine shop do you mean like auto barn or supercheap or do you mean mechanic. how much was it?

cheers

Your boiler looks awesome, thinking I might do something like this with my boiler in the future.

WTDist wrote:

Aussiedownunder01 wrote:

WTDist wrote:If your not in a hurry ill let you know how this goes in a week or so. got some buffing and polishing wheels and some California purple metal polish to test out then coat it with this below, once i buy the clear coat that is

https://www.bunnings.com.au/dulux-duram ... t_p1400741

Aparantley that wont stand heat
Ended up going to the auto shop and got a can of engine clear

Thx for the heads up. When you say engine shop do you mean like auto barn or supercheap or do you mean mechanic. how much was it?

cheers

Auto barn $15.00good for 150 deg they have other dearer stuff good for 1000 deg

awesome, thats $10 cheaper than the one i was going to get. gonna go search for it now

Cheers

Edit; was this it?
https://www.autobarn.com.au/motospray-t ... lic-tcc400

WTDist wrote:awesome, thats $10 cheaper than the one i was going to get. gonna go search for it now

Cheers

Edit; was this it?
https://www.autobarn.com.au/motospray-t ... lic-tcc400

No VHT engine enamel clear

Aussiedownunder01 wrote:

WTDist wrote:awesome, thats $10 cheaper than the one i was going to get. gonna go search for it now

Cheers

Edit; was this it?
https://www.autobarn.com.au/motospray-t ... lic-tcc400

No VHT engine enamel clear

Cheers man, got it. Ill pick some up tomorrow. :handgestures-thumbupleft:

Just did the spirit run all good super happy :handgestures-thumbupleft: