Boiler - Weldless Element
Posted:
Sun Jul 24, 2016 11:53 pm
by Maritsio2016
Hey guys sorry bout the dumb questions but i really can't find the answer. My next step is to upgrade boiler to accommodate the awesome stuff on top but i can't weld and can get my grubby hands on some kegs but cant see how once the spigot is removed how in the hell after you drill a hole to accommodate the element do you hold a washer and nut in place on the inside of the keg? it's doing my small brain in. I want a Mac milk can but my pregnant wife wants a bigger house. any help is greatly appreciated.
Re: Boiler
Posted:
Mon Jul 25, 2016 12:01 am
by Zak Griffin
image.jpg
You pull the element through the keg backwards and do the nut up from the outside :handgestures-thumbupleft:
Re: Boiler
Posted:
Mon Jul 25, 2016 12:52 am
by Maritsio2016
Zak Griffin wrote:image.jpg
You pull the element through the keg backwards and do the nut up from the outside :handgestures-thumbupleft:
here's me thinking the nut has to be on the inside that makes total sense thx mate.
Re: Boiler
Posted:
Mon Jul 25, 2016 12:54 am
by Maritsio2016
Maritsio2016 wrote:Zak Griffin wrote:image.jpg
You pull the element through the keg backwards and do the nut up from the outside :handgestures-thumbupleft:
here's me thinking the nut has to be on the inside that makes total sense thx mate.
Will be callilin Mrs Mac first thing tmoz :-B