Aussiedistiller, Home Distilling, Moonshine, Home Brew

I am in the process of converting my 50l keg to a boiler. More on that in another thread. Looking at starting off with the modular pot, that has the 4x2" reducer at the bottom for the keg connection. Will this connection be strong enough to hold the weight of 5 plates, r/condensor and a packed section?

Sure will, that's what the neutraliser ships with.

EDIT: actually, just looked at the picture on the FSD site and it would appear that I lied. It actually ships with the 100mm section of 4". I reckon there's tones of folks using the neutraliser on a 2" connection though.

Cheers,
Prof. Green.

Professor Green wrote:Sure will, that's what the neutraliser ships with.

EDIT: actually, just looked at the picture on the FSD site and it would appear that I lied. It actually ships with the 100mm section of 4". I reckon there's tones of folks using the neutraliser on a 2" connection though.

Cheers,
Prof. Green.

:text-+1: that is how mine is set up. I started with a modular 4" pot and then slowly added the rest over a period of time.
The beauty of it going modular.

With regards,
Nino

sweet! :happy-partydance: