Page 1 of 1

Modular still info

PostPosted: Thu Apr 26, 2018 7:22 pm
by travid86
Hey guys just need some advice hope it in the right topic...I have a 4'' modular 5 star pot still was thinking about turning it into a bubbler...so my question being is how many 4'' complete SG tee kits (bubbler tee's) will i need
Cheers guys

Re: Modular still info

PostPosted: Thu Apr 26, 2018 7:25 pm
by RC Al
Depending on the wash your running 3-4 is a great place to start

Re: Modular still info

PostPosted: Thu Apr 26, 2018 7:44 pm
by Lowie
Three ok for bourbons, four will give you good all-round results. Six if you want to make better "vodka"
Cheers.

Re: Modular still info

PostPosted: Thu Apr 26, 2018 8:06 pm
by Doubleuj
4 would be a great alrounder :handgestures-thumbupleft:

Re: Modular still info

PostPosted: Thu Apr 26, 2018 8:08 pm
by travid86
cool thanks guys i thought 4 where going to be the way to go....also i only make bourbon :-D :-D

Re: Modular still info

PostPosted: Thu Apr 26, 2018 8:24 pm
by Lowie
Check out Brendans simple all grain bourbon in the recipe section. If you like bourbon, his tutorial is excellent. I have used it many times. Don't know why it's not in the tried and proven...

Re: Modular still info

PostPosted: Thu Apr 26, 2018 8:39 pm
by Doubleuj
Lowie wrote:Check out Brendans simple all grain bourbon in the recipe section. If you like bourbon, his tutorial is excellent. I have used it many times. Don't know why it's not in the tried and proven...

Haven’t read that thread for years, but here it is
https://www.aussiedistiller.com.au/viewtopic.php?f=25&t=5787

Re: Modular still info

PostPosted: Fri Apr 27, 2018 12:57 pm
by hillzabilly
I would get 4 tee's ,as ta how many plates ya use may depend on product and your taste,but I have found useing 4 tee's gives you a good collection height that useing less may not give ,there is nothing wrong with haveing 4tee's with only 2 bubble plates fitted .cheers hillzabilly ;-)