EOI weldless elements

High performance modular SS304 plated columns and accessories.

Re: EOI weldless elements

Postby Distillnation » Wed Mar 13, 2013 1:06 pm

Awesome, that's what I wanted to hear. I was going to use a weld less in my beer kettle but decided on an over-the-side immersion element due to only doing BIAB.

Hopefully these aren't too far off then.
Cheers
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby MacStill » Thu Mar 14, 2013 9:33 am

Distillnation wrote:

Hopefully these aren't too far off then.
Cheers


About 3 weeks mate, we had a slight miscommunication and had to delay production for a bit, but they are happening now :handgestures-thumbupleft:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby Distillnation » Thu Mar 14, 2013 11:42 am

MacStill wrote:About 3 weeks mate, we had a slight miscommunication and had to delay production for a bit, but they are happening now :handgestures-thumbupleft:


Awesome, sounds good!

I can always make do with a gas burner until then, at least to do the cleaning runs anyway :handgestures-thumbupleft:
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby MacStill » Tue Mar 26, 2013 2:38 pm

I've just confirmed with my supplier that these elements will be here the first week in April, they are being sent from OS in a few days :handgestures-thumbupleft:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby Brendan » Tue Mar 26, 2013 3:18 pm

^:)^

Well done Mac, identifying and supplying a need in the hobby (including beer brewing).

You should sell them to the home brew shops too...they love new improved models :handgestures-thumbupleft:
Brendan
 
Posts: 2146
Joined: Mon Nov 21, 2011 5:06 pm
Location: Hunter Valley, NSW
equipment: 4.99L Essential oil extractor

Re: EOI weldless elements

Postby Distillnation » Tue Mar 26, 2013 5:41 pm

:dance:

That's good news! Hopefully I can have my controller wired by then, or at least have the parts here.

Can't wait :D
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby 1 2many » Tue Mar 26, 2013 6:07 pm

Mac what is the electric connection screwed or solder ? And can you supply 1" bsb nuts to suit .Cheers
1 2many
Site Donor
 
Posts: 4212
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: EOI weldless elements

Postby MacStill » Tue Mar 26, 2013 8:47 pm

1 2many wrote:Mac what is the electric connection screwed or solder ? And can you supply 1" bsb nuts to suit .Cheers


They have the active & neutral wires attached & the 1" BSP nut is supplied :handgestures-thumbupleft:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby 1 2many » Wed Apr 03, 2013 5:00 pm

Any sign of the new elements Mac ,want to have a look see.
1 2many
Site Donor
 
Posts: 4212
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: EOI weldless elements

Postby MacStill » Wed Apr 03, 2013 5:11 pm

not yet mate, I'll update this thread as soon as they arrive :handgestures-thumbupleft:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby Distillnation » Wed Apr 03, 2013 5:56 pm

Can't wait! :dance:

Do you have an idea of what parts will be used for the element guard, or is that more of a "I'll know when I see it" kind of thing.

Going to be heading down to a plumbing shop tomorrow (just so happens to be in the same town as another place I need to go to) to get some other copper fittings :D
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby MacStill » Wed Apr 03, 2013 6:07 pm

Distillnation wrote:Can't wait! :dance:

Do you have an idea of what parts will be used for the element guard, or is that more of a "I'll know when I see it" kind of thing.


:handgestures-thumbupleft:

I will have a better solution to DIY guards very soon too ;-)
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby Distillnation » Wed Apr 03, 2013 6:17 pm

MacStill wrote:I will have a better solution to DIY guards very soon too ;-)


:handgestures-thumbupleft:

You're doing a great job Mac!
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby MacStill » Wed Apr 03, 2013 6:20 pm

As with anything design wise & overseas communication things tend to happen slowly, it's very time consuming and frustrating at times but when the courier rocks up it's also very rewarding ;-)
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby 1 2many » Wed Apr 03, 2013 6:23 pm

Get some pics up real quick hey Mac :handgestures-thumbupleft:
1 2many
Site Donor
 
Posts: 4212
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: EOI weldless elements

Postby Distillnation » Wed Apr 03, 2013 6:24 pm

I could only imagine.

I get excited when one or two parts show up. It would be like Easter, Birthday, Christmas, Anniversaries...all in one with a delivery that big :D (Even if they aren't all for you :)) )
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: EOI weldless elements

Postby MacStill » Wed Apr 03, 2013 6:36 pm

1 2many wrote:Get some pics up real quick hey Mac :handgestures-thumbupleft:


A lot of gear is only in the design stage, some pieces are almost in production..... pics will be happening as soon as I can mate, I want this gear as much as you guys do :drool:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby MacStill » Fri Apr 05, 2013 12:12 pm

Tracking info says "out with courier for delivery"

:pray: :pray: :pray:
MacStill
Site Founder
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: EOI weldless elements

Postby Distillnation » Fri Apr 05, 2013 1:39 pm

:happy-partydance:

That sounds great!
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Previous

Return to 5 Star Distilling



Who is online

Users browsing this forum: No registered users and 4 guests

x