Page 2 of 2

Re: EOI weldless elements

PostPosted: Wed Mar 13, 2013 1:06 pm
by Distillnation
Awesome, that's what I wanted to hear. I was going to use a weld less in my beer kettle but decided on an over-the-side immersion element due to only doing BIAB.

Hopefully these aren't too far off then.
Cheers

Re: EOI weldless elements

PostPosted: Thu Mar 14, 2013 9:33 am
by MacStill
Distillnation wrote:

Hopefully these aren't too far off then.
Cheers


About 3 weeks mate, we had a slight miscommunication and had to delay production for a bit, but they are happening now :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Thu Mar 14, 2013 11:42 am
by Distillnation
MacStill wrote:About 3 weeks mate, we had a slight miscommunication and had to delay production for a bit, but they are happening now :handgestures-thumbupleft:


Awesome, sounds good!

I can always make do with a gas burner until then, at least to do the cleaning runs anyway :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Tue Mar 26, 2013 2:38 pm
by MacStill
I've just confirmed with my supplier that these elements will be here the first week in April, they are being sent from OS in a few days :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Tue Mar 26, 2013 3:18 pm
by Brendan
^:)^

Well done Mac, identifying and supplying a need in the hobby (including beer brewing).

You should sell them to the home brew shops too...they love new improved models :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Tue Mar 26, 2013 5:41 pm
by Distillnation
:dance:

That's good news! Hopefully I can have my controller wired by then, or at least have the parts here.

Can't wait :D

Re: EOI weldless elements

PostPosted: Tue Mar 26, 2013 6:07 pm
by 1 2many
Mac what is the electric connection screwed or solder ? And can you supply 1" bsb nuts to suit .Cheers

Re: EOI weldless elements

PostPosted: Tue Mar 26, 2013 8:47 pm
by MacStill
1 2many wrote:Mac what is the electric connection screwed or solder ? And can you supply 1" bsb nuts to suit .Cheers


They have the active & neutral wires attached & the 1" BSP nut is supplied :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 5:00 pm
by 1 2many
Any sign of the new elements Mac ,want to have a look see.

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 5:11 pm
by MacStill
not yet mate, I'll update this thread as soon as they arrive :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 5:56 pm
by Distillnation
Can't wait! :dance:

Do you have an idea of what parts will be used for the element guard, or is that more of a "I'll know when I see it" kind of thing.

Going to be heading down to a plumbing shop tomorrow (just so happens to be in the same town as another place I need to go to) to get some other copper fittings :D

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:07 pm
by MacStill
Distillnation wrote:Can't wait! :dance:

Do you have an idea of what parts will be used for the element guard, or is that more of a "I'll know when I see it" kind of thing.


:handgestures-thumbupleft:

I will have a better solution to DIY guards very soon too ;-)

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:17 pm
by Distillnation
MacStill wrote:I will have a better solution to DIY guards very soon too ;-)


:handgestures-thumbupleft:

You're doing a great job Mac!

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:20 pm
by MacStill
As with anything design wise & overseas communication things tend to happen slowly, it's very time consuming and frustrating at times but when the courier rocks up it's also very rewarding ;-)

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:23 pm
by 1 2many
Get some pics up real quick hey Mac :handgestures-thumbupleft:

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:24 pm
by Distillnation
I could only imagine.

I get excited when one or two parts show up. It would be like Easter, Birthday, Christmas, Anniversaries...all in one with a delivery that big :D (Even if they aren't all for you :)) )

Re: EOI weldless elements

PostPosted: Wed Apr 03, 2013 6:36 pm
by MacStill
1 2many wrote:Get some pics up real quick hey Mac :handgestures-thumbupleft:


A lot of gear is only in the design stage, some pieces are almost in production..... pics will be happening as soon as I can mate, I want this gear as much as you guys do :drool:

Re: EOI weldless elements

PostPosted: Fri Apr 05, 2013 12:12 pm
by MacStill
Tracking info says "out with courier for delivery"

:pray: :pray: :pray:

Re: EOI weldless elements

PostPosted: Fri Apr 05, 2013 1:39 pm
by Distillnation
:happy-partydance:

That sounds great!