Weldless Elements

High performance modular SS304 plated columns and accessories.

Weldless Elements

Postby MacStill » Fri Apr 05, 2013 4:49 pm

Finally we have an option to replace those dodgy keg king elements that have been causing so much grief for everyone, just pull your old one out and replace it with this :handgestures-thumbupleft:

They're going to need a plug installed on them by your electrician just the same as the others I sell.

The specs are

Material of pipe: SUS304; SS material 1” BSP thread.

Pipe Dia 19mmX 250MM(Total length).

Power: 240V/2400W.

Price per unit is $50 plus post, however as a special introductory offer you can have 2 elements express posted to your door for $105 (save $9) :dance:

Special is only for the first 50 units.

Here's a pic, I'll upload some better ones later this evening.

IMG_1394.JPG


Cheers :D
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby Linny » Fri Apr 05, 2013 4:55 pm

Is there more than 50 units ? LOL think your going to need it :handgestures-thumbupleft:

You do know your a bad influence :violence-smack: lol , i was thinking of upsizing my little 5L CM ... the only thing holding me back was i didnt want to weld a socket onto 1mm cheap SS (more like didnt have the skills to weld to 1mm :)) )
Linny
 
Posts: 1147
Joined: Thu Oct 11, 2012 8:46 pm
Location: Newcastle NSW
equipment: 4 Plate 3" Glass Bubbler - 50L Boiler
50L BIAB Temp Controlled Mash Tun

3" Carter Head Soon to Come

Re: Weldless Elements are Here (2400w)

Postby Cane Toad » Fri Apr 05, 2013 4:58 pm

Cool mate you'd better chuck a couple in my box of goodies,hope you got plenty of express post bags coz I think you're gunna need em :laughing-rolling: :laughing-rolling:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Weldless Elements are Here (2400w)

Postby 1 2many » Fri Apr 05, 2013 4:58 pm

I will take 2 :D
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Weldless Elements are Here (2400w)

Postby googe » Fri Apr 05, 2013 5:11 pm

They look good quality Mac, single solid rod?. Good luck.mate.
googe
 

Re: Weldless Elements are Here (2400w)

Postby Distillnation » Fri Apr 05, 2013 5:28 pm

I'll take one!

Now where do I place an order.
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: Weldless Elements are Here (2400w)

Postby MacStill » Fri Apr 05, 2013 5:52 pm

Just PM me :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Weldless Elements are Here (2400w)

Postby BackyardBrewer » Fri Apr 05, 2013 6:45 pm

That is an amazing price!
BackyardBrewer
Site Donor
 
Posts: 1824
Joined: Thu Mar 22, 2012 1:18 pm
Location: South Aussie
equipment: Solid Copper Love Machine (Plated column bubbler), hand made with love by a forum member
50L keg boiler with 2 x 2400w elements
PURE distilling Reflux still + a tonne of homebrew gear amassed over 10 years of brewing.

Re: Weldless Elements are Here (2400w)

Postby MacStill » Fri Apr 05, 2013 8:33 pm

Cupcake wrote:Cool mate you'd better chuck a couple in my box of goodies


No drama :handgestures-thumbupleft:

Linny wrote:Is there more than 50 units ?


Yes mate I have a few ;-)

googe wrote:They look good quality Mac, single solid rod?. Good luck.mate.


Yes mate they're nearly the same as the keg king jobs, just better :handgestures-thumbupleft:

1 2many wrote:I will take 2 :D


Done :D

BackyardBrewer wrote:That is an amazing price!


Yep! they're good value alright, I'm extremely happy with the quality too :dance:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby Jonno » Sat Apr 06, 2013 7:12 am

Hey mac,

Are the terminals crimp style? Solder on?

Could ya take a photo of the terminals please

Cheers mate
Jonno
 

Re: Weldless Elements are Here (2400w)

Postby MacStill » Sat Apr 06, 2013 9:45 am

Will do Jonno, might be a bit later today though but I'll get on to it :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby MacStill » Sat Apr 06, 2013 10:27 am

IMG_1400.JPG
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby 1 2many » Sat Apr 06, 2013 10:35 am

MacStill wrote:
IMG_1400.JPG


Mac have you started a design on the cable housing yet ? Could use one of those ss 1" bsb fittings to house the connections and earth at the same time maybe ;-)
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Weldless Elements are Here (2400w)

Postby MacStill » Sat Apr 06, 2013 11:00 am

1 2many wrote:
MacStill wrote:
IMG_1400.JPG


Mac have you started a design on the cable housing yet ? Could use one of those ss 1" bsb fittings to house the connections and earth at the same time maybe ;-)


Gimme a break mate geez, I havnt had em here 24 hours yet :laughing-rolling:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby Distillnation » Sat Apr 06, 2013 11:11 am

:laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: Weldless Elements are Here (2400w)

Postby MacStill » Sat Apr 06, 2013 11:17 am

Distillnation wrote: I think I read that these required a 32mm hole, is that right?


Correct :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby Distillnation » Sat Apr 06, 2013 11:21 am

Great! That will give me something to do to kill the time while I wait for stuff to get here :D

There's just too many hours in a day when you're waiting for the mail, and not enough when you're working on the still.
Distillnation
 
Posts: 291
Joined: Tue Jan 08, 2013 8:04 pm
Location: South Australia
equipment: L.M Frankenstill + 50L (weldless) electric boiler

Re: Weldless Elements are Here (2400w)

Postby 1 2many » Sat Apr 06, 2013 11:27 am

Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: Weldless Elements are Here (2400w)

Postby MacStill » Sat Apr 06, 2013 11:29 am

1 2many wrote:
Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}


Ever measured a 1" BSP male thread ? :angry-banghead:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: Weldless Elements are Here (2400w)

Postby 1 2many » Sat Apr 06, 2013 11:37 am

MacStill wrote:
1 2many wrote:
Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}


Ever measured a 1" BSP male thread ? :angry-banghead:


Well i will be buggered ,Have now 32 mm :D :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Next

Return to 5 Star Distilling



Who is online

Users browsing this forum: No registered users and 14 guests

x