Aussiedistiller, Home Distilling, Moonshine, Home Brew

Finally we have an option to replace those dodgy keg king elements that have been causing so much grief for everyone, just pull your old one out and replace it with this :handgestures-thumbupleft:

They're going to need a plug installed on them by your electrician just the same as the others I sell.

The specs are

Material of pipe: SUS304; SS material 1” BSP thread.

Pipe Dia 19mmX 250MM(Total length).

Power: 240V/2400W.

Price per unit is $50 plus post, however as a special introductory offer you can have 2 elements express posted to your door for $105 (save $9) :dance:

Special is only for the first 50 units.

Here's a pic, I'll upload some better ones later this evening.



Cheers :D

Is there more than 50 units ? LOL think your going to need it :handgestures-thumbupleft:

You do know your a bad influence :violence-smack: lol , i was thinking of upsizing my little 5L CM ... the only thing holding me back was i didnt want to weld a socket onto 1mm cheap SS (more like didnt have the skills to weld to 1mm :)) )

Cool mate you'd better chuck a couple in my box of goodies,hope you got plenty of express post bags coz I think you're gunna need em :laughing-rolling: :laughing-rolling:

I will take 2 :D

They look good quality Mac, single solid rod?. Good luck.mate.

I'll take one!

Now where do I place an order.

Just PM me :handgestures-thumbupleft:

That is an amazing price!

Cupcake wrote:Cool mate you'd better chuck a couple in my box of goodies

No drama :handgestures-thumbupleft:

Linny wrote:Is there more than 50 units ?

Yes mate I have a few ;-)

googe wrote:They look good quality Mac, single solid rod?. Good luck.mate.

Yes mate they're nearly the same as the keg king jobs, just better :handgestures-thumbupleft:

1 2many wrote:I will take 2 :D

Done :D

BackyardBrewer wrote:That is an amazing price!

Yep! they're good value alright, I'm extremely happy with the quality too :dance:

Hey mac,

Are the terminals crimp style? Solder on?

Could ya take a photo of the terminals please

Cheers mate

Will do Jonno, might be a bit later today though but I'll get on to it :handgestures-thumbupleft:

MacStill wrote:

IMG_1400.JPG

Mac have you started a design on the cable housing yet ? Could use one of those ss 1" bsb fittings to house the connections and earth at the same time maybe ;-)

1 2many wrote:

MacStill wrote:

IMG_1400.JPG

Mac have you started a design on the cable housing yet ? Could use one of those ss 1" bsb fittings to house the connections and earth at the same time maybe ;-)

Gimme a break mate geez, I havnt had em here 24 hours yet :laughing-rolling:

:laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

Distillnation wrote: I think I read that these required a 32mm hole, is that right?

Correct :handgestures-thumbupleft:

Great! That will give me something to do to kill the time while I wait for stuff to get here :D

There's just too many hours in a day when you're waiting for the mail, and not enough when you're working on the still.

Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}

1 2many wrote:

Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}

Ever measured a 1" BSP male thread ? :angry-banghead:

MacStill wrote:

1 2many wrote:

Distillnation wrote::laughing-rolling:

I was waiting for someone to ask that.

If I can remember correctly, I think I read that these required a 32mm hole, is that right?

So much for the 1" bsb theory 8-}

Ever measured a 1" BSP male thread ? :angry-banghead:

Well i will be buggered ,Have now 32 mm :D :handgestures-thumbupleft: