FSD Mac-4 SSG, $1690

High performance modular SS304 plated columns and accessories.

FSD Mac-4 SSG, $1690

Postby MacStill » Sun May 05, 2013 5:15 pm

This still is exactly the same as the FSD Mac-4 except it has the screw on sight glasses (SSG)

These units as a complete package are $1750.

For the investment of $1750 you get a four plate bubbler made of 304 Stainless Steel and personal after sales service & support by phone 7 days per week, you also get one of Australia's most experienced plated column users/builder to guide you through the initial stages of setup and run strategies.

No one even comes close to offering this type of product or service, with quality & experience you can trust.

P4080106.JPG
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Sun May 05, 2013 6:27 pm

Here's the pic of the SSG dismantled, the glass is toughened borosilicate (pyrex) 10mm thick.

P4090113.JPG


The outer gasket is PTFE & the inner is EPDM, I chose the EPDM on the supplier's recommendation for distillation, being that it is softer and less prone to leaking than PTFE, also that they say it is less likely to break down than silicone.

Cheers :D
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby Sam. » Sun May 05, 2013 9:12 pm

I can personally vouch for the quality of these new sightglasses, they seal beautifully and are easy as to assemble.

As for the thickness I was blown away, 10mm is pretty damn thick when you are talking about a sight glass :handgestures-thumbupleft:

Makes for a cleaner look as well I reckon :D

Not to mention the quality of the rest of the still, unbelievable the manufacturing that has gone into these things, and one of the best things for me.... easy as hell to clean :happy-partydance: Cleaning stainless to cleaning copper there is no comparison :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Sun May 05, 2013 9:27 pm

Your feedback is most welcome Sam, thank you :handgestures-thumbupleft:

If there's one thing I know about you mate, and that's you say it how it is..... :D
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby Jonno » Sun May 05, 2013 9:30 pm

What's the difference between the tri clamps and these screw type lenses mac? Other then the cleaner look. Are the lenses the same on these vs the tri clamp ones?

Cheers mate
Jonno
 

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Sun May 05, 2013 9:34 pm

Jonno wrote:What's the difference between the tri clamps and these screw type lenses mac? Other then the cleaner look. Are the lenses the same on these vs the tri clamp ones?

Cheers mate


The glass is the same material, just much much thicker & virtually unbreakable.

The SSG's are really easy to remove and install on a standing column, nowhere near the care needed of the clamped style SG's.

Cheers :D
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby wedwards » Sun May 05, 2013 10:05 pm

My preciousssssssssssssssss :laughing-rolling:

I am getting closer every day to getting one of these.....and its not fair to keep posting pics hahaha
wedwards
 
Posts: 342
Joined: Tue Jul 24, 2012 7:43 pm
equipment: Reflux still

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Sun May 05, 2013 10:20 pm

wedwards wrote:My preciousssssssssssssssss :laughing-rolling:

I am getting closer every day to getting one of these.....and its not fair to keep posting pics hahaha


OK my apologies :teasing-neener:

Here's Sams 5 plater with gin basket & packed section fitted :D
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Mon May 13, 2013 5:55 pm

Here's Dave's rig getting ready for shipping in the next couple of days, just waiting for my other half of my order to show up :D

P5130164.jpg
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Mon May 13, 2013 5:56 pm

The sky's the limit, well almost :))

P5130165.jpg
You do not have the required permissions to view the files attached to this post.
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby DaveZ » Mon May 13, 2013 6:57 pm

She's a stunner :D
DaveZ
 
Posts: 333
Joined: Sun Feb 17, 2013 1:53 pm
Location: Central Qld
equipment: 5 plate FSD bubbler with gin basket and packed rock section on a 50L, 4800W keg

Re: FSD Mac-4 SSG, $1750

Postby 1 2many » Mon May 13, 2013 7:02 pm

Better bring your guy ropes and tent pegs for that giant. :scared-eek:
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: FSD Mac-4 SSG, $1750

Postby DaveZ » Mon May 13, 2013 7:06 pm

Although I'm a little frightened by the height. Mine should end up much the same as sams in the pic above yeah? Any idea on the total height including the keg roughly? Can always run it out the back if it doesn't fit in the kitchen.
DaveZ
 
Posts: 333
Joined: Sun Feb 17, 2013 1:53 pm
Location: Central Qld
equipment: 5 plate FSD bubbler with gin basket and packed rock section on a 50L, 4800W keg

Re: FSD Mac-4 SSG, $1750

Postby MacStill » Mon May 13, 2013 7:09 pm

You wont be running 5 plates & the packed section in the kitchen :))
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: FSD Mac-4 SSG, $1750

Postby DaveZ » Mon May 13, 2013 7:21 pm

Hahaha oh well, out the back it is then if I feel the need for some neutral :laughing-rolling:
DaveZ
 
Posts: 333
Joined: Sun Feb 17, 2013 1:53 pm
Location: Central Qld
equipment: 5 plate FSD bubbler with gin basket and packed rock section on a 50L, 4800W keg

Re: FSD Mac-4 SSG, $1750

Postby DaveZ » Fri Jun 21, 2013 8:01 pm

Excuse the mess, but

MacStill wrote:You wont be running 5 plates & the packed section in the kitchen :))


Bullshit :laughing-rolling: :laughing-rolling:

Image
DaveZ
 
Posts: 333
Joined: Sun Feb 17, 2013 1:53 pm
Location: Central Qld
equipment: 5 plate FSD bubbler with gin basket and packed rock section on a 50L, 4800W keg

Re: FSD Mac-4 SSG, $1750

Postby Cane Toad » Fri Jun 21, 2013 8:24 pm

:laughing-rolling: :laughing-rolling: :laughing-rolling: You were wrong,yet again Mac :handgestures-thumbupleft: :laughing-rolling: :laughing-rolling:
Looking good Dave :handgestures-thumbupleft: :handgestures-thumbupleft:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: FSD Mac-4 SSG, $1750

Postby Cane Toad » Fri Jun 21, 2013 8:26 pm

Fuck Dave :think: :think: Is that a workshop or a kitchen,your Missus must be real easy going :laughing-rolling: :laughing-rolling:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: FSD Mac-4 SSG, $1750

Postby DaveZ » Fri Jun 21, 2013 8:28 pm

It doubles as both, I'm living the single life at the moment so no nagging here :handgestures-thumbupleft: :handgestures-thumbupleft:
DaveZ
 
Posts: 333
Joined: Sun Feb 17, 2013 1:53 pm
Location: Central Qld
equipment: 5 plate FSD bubbler with gin basket and packed rock section on a 50L, 4800W keg

Re: FSD Mac-4 SSG, $1750

Postby Bushy » Fri Jun 21, 2013 9:20 pm

Definitely looks like a bachelor's kitchen. Actually a lot fkn neater than most i've had. You some kind of a neat freak dave? :-D
Is that a drain under your boiler?
Bushy
 
Posts: 1003
Images: 0
Joined: Sun Jun 17, 2012 8:25 am
Location: Crabland, West Australia
equipment: 50l keg boiler with 5Star 3600 watt element
4 inch plated column. 4 perf plates.
Lava Rock Behemoth

Next

Return to 5 Star Distilling



Who is online

Users browsing this forum: No registered users and 4 guests

x