Introducing The New FSD Blockhead

[woodduck]

Let me know if ya need an offsider :romance-kisscheek: 8-} I'm interested to see the lemon wash

Yer he keeps teasing us with this lemon wash :laughing-rolling:

Mmmm you could use the lemon wash as you acid cleaning run aswell as your sac run, 2 birds 1stone :teasing-neener: :laughing-rolling: :laughing-rolling: :laughing-rolling:

[northernbrewer]

Hey Mac

Do you happen to know off hand what the diameter of the stainless bolts holding the glass sections together are?

Minds a thinking about a glasser :D

[BIG D]

Cool looking glasser Mac. :handgestures-thumbupleft:

[MacStill]

Hey Mac

Do you happen to know off hand what the diameter of the stainless bolts holding the glass sections together are?

Minds a thinking about a glasser :D

The 4" tubes use 8mm rods & the 6" tubes use 10mm :-B

[viking]

Looks good Mac

[1 2many]

So there ya's go...... glass blockhead with Mac custom hand built 6" inline thumper plate.

I have the same 6" plate in mine but can't see it run :crying-blue: That 6" glass module looks magic :music-deathmetal:

Would love to see it running :whistle:

The Blockhead Glasser can't beat that :clap: :clap: :handgestures-thumbupleft:

[Hari]

So is that a packed section on top of three plates with the reflux condenser at the top?

What's in the thumper/what's it do? I'd love a photo up the skirt so I could see what was going on.

It's all just so precise! My beloved bubbler is very organic in comparison. This is surgical blades compared to kitchen knives.

So slick.

Hi Mac,
I assume there is no reflux condensor on the top. A Harry cross flow type on top for reflux and a valve on the side arm would make a great VM still.

What do you reckon?
regards
Duncan

[MacStill]

Hi Hari,

There is a reflux condenser just below the take off, all our bubblers are essentially CM ;-)