Aussiedistiller, Home Distilling, Moonshine, Home Brew

Another of my long awaited shipments has arrived :happy-partydance:

Perforated plates and my new bubble cap plates.



The bubble caps are arriving next week to fit the plates, and the perf plate you simply flip a bubble cap upside down for the downcomer, or make your own downcomer to fit it.

In a couple of weeks we'll see a purpose built "no solder" bolt in downcomer hit the FSD shelves to match these plates, they're going to be pretty flash little set up once all the parts are installed :D



The perf plate specs are:



The bubble cap plate is 105mm diameter.

I'll figure out pricing over the weekend once I've had a look at all my invoices then update this post.

Cheers.

Shit yeah. They will save some time and effort for people building themselves a bubbler.

very nice!!!
seriously dont have the cash to even build my own, but dam I wish i could jump onto some of this new gear!! It all looks schmick :handgestures-thumbupleft: :handgestures-thumbupleft:

Dunno if the demand would be there, but any chance of a blank plate for a DIY option?

punchy21 wrote:Dunno if the demand would be there, but any chance of a blank plate for a DIY option?

I think for the price these will be available for you'd really need to be into self harm for a DIY option :teasing-neener:

:))

Mac, you never stop thinking do you? :clap: :clap: :clap: :clap:

Brilliant work mate... I cannot wait to see these as they develop. You deserve success, good to see an Aussie making a difference.
Doc

I reckon you will sell heaps of those. It's such a pain in the arse to drill a million holes............ can't wait till these are available :handgestures-thumbupleft:

MacStill wrote:
I think for the price these will be available for you'd really need to be into self harm for a DIY option

:))

HAHAHA.

Shit yea I'm loving all this stuff. I may get a bubbler sooner then I thought.

forefold wrote:I reckon you will sell heaps of those. It's such a pain in the arse to drill a million holes............ can't wait till these are available :handgestures-thumbupleft:

Come on, it's not really that hard. Haha jokes! I build and repair aircraft for a living & the amount of holes in 4 plates is small compared to the amount of drilling required to do a rivet repair patch on an Aircraft! So these would be a real help to save my arm drilling eleventy billion holes!

Congrats Mac, what an awesome idea to get these made. Will save people a lot of time! Looks like an outstanding manufacturing!

It's not hard but it is a friggin pain in the arse ! Many drill bits later it's finally done ..... Much easier to walk to the front door and pick up a package ... Yep that's a winner ! :grin:

Sent from my GT-I9210T using Tapatalk 2

Is $10 each a fair price ?

That would be for just the plate & no downcomer.

if people are happy with $10 per perf plate then I'll offer them for that, at this price my profit margins are pretty much A WOFTAM.

Taking orders for these now :handgestures-thumbupleft:

At that price I might go modular with my build :laughing-rolling:

I still might even get them and just file down lol

MacStill wrote:Is $10 each a fair price ?

That would be for just the plate & no downcomer.

if people are happy with $10 per perf plate then I'll offer them for that, at this price my profit margins are pretty much A WOFTAM.

Taking orders for these now :handgestures-thumbupleft:

$10? :o For that price I definitely can't be farked making my own when these are available so bloody cheap. :happy-partydance: :happy-partydance:
Count me in for 6 or maybe a few extra's....
Any idea when you'll have the 6" perf plates?
I'll flick you a pm :handgestures-thumbupleft:

Yeah mate fuck aye, I'll take 4 !

Sent from my GT-I9210T using Tapatalk 2

Thank You all for the supportive comments and inundation of PM's, I've knocked off for the evening and will respond with your order requests first thing in the morning :handgestures-thumbupleft:

I have rum now, nothing else matters :teasing-neener:

MacStill wrote:Is $10 each a fair price ?

That would be for just the plate & no downcomer.

if people are happy with $10 per perf plate then I'll offer them for that, at this price my profit margins are pretty much A WOFTAM.

Taking orders for these now :handgestures-thumbupleft:

I would rather pay the $10 than to drive down to bunnings to buy the fucking drill bits ;-)

With the plate speck 16.5 mm hole I don't seem to find copper that size
Am I mis reading it

The downcomer hole is 16.5mm to allow for the new bolt in downcomers I'm getting soon, you could easily file them out if you wanted too.

I'll get a pic in a couple of hours of how I would solder in a downcomer, without modifying the tray :handgestures-thumbupleft:

Cheers.