neutralizer height.....

[Redux]

whats the height of a full spec neutralizer from the keg?

redux

[TheMechwarrior]

4"?

[Sinerjee]

4"?

4 inches seems awfully small for a full size neutralizer :shock:

[TheMechwarrior]

lolz

Does he want the height for a 4" or a 8" or some other sized rig?
I can only give you the 6" rig height. Got a feeling the 4" height is mentioned in the blockhead thread?

[Redux]

sorry lads... the height is for a 4 inch diameter rig.... standard setup.. no frills no odd ends....

the height im after is for a 4 inch neutralizer..... from the keg... to the top...the heighest point.... the crest.... apex etc......

cheers

redux

[MacStill]

I'm unable to verify at the moment, but 2130mm was the first thought I had.... :think:

[MacStill]

I'm unable to verify at the moment, but 2130mm was the first thought I had.... :think:

It's 1930 with a 2" boiler connection, minus 100mm for a short 4" boiler connection (recommended).

:handgestures-thumbupleft:

ps. my external drive with all this info isnt on me until monday.

[BIG D]

I'm 6ft if that helps

[spit'n'shine]

Fu@$ me! They are much taller than they look in pic by themselves!! :o

[Redux]

hmmm taller than i had in my head too..

[BIG D]

Think of it as wow factor 8-} I love it by the way that a 4"to2" reducer and a tall skinny keg.

[Zak Griffin]

Instead of the spacer/reducer above the RC and then the 180, you could run a blockhead type 180 and save yourself a fair bit of height :D

That, along with the shorter reducer (or a 4" still port on the keg), and you'd be laughing!

[BIG D]

Bigger is better isn't it? :text-lol: I guess it depends on how often you run it for neutral not that often for me so a day outside is nice as a 4 plater for my other brews inside to easy :handgestures-thumbupleft:

[1 2many]

:text-+1: Yep my thoughts to Zak :handgestures-thumbupleft:

[Leeroy]

I have a 4" set up here that’s 1750mm from the boiler connection :handgestures-thumbupleft:

[Redux]

I have a 4" set up here that’s 1750mm from the boiler connection :handgestures-thumbupleft:

thanks Leeroy...
ill be running in neutral mode mostly... so thts the height i need to work from...

cheers redux