5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchI'm a bit confused about the question, but hopefully you find your answer in this thread :handgestures-thumbupleft:
viewtopic.php?t=2301&f=41#p30456
Element guard question
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.
"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"
the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.
Regards,
aussiedistiller team.
23 posts
• Page 2 of 2 • 1, 2
Re: Element guard question
by MacStill » Wed Jan 07, 2015 8:04 pm
- MacStill
- Lifetime Member
- Posts: 16835
- Joined: Fri Mar 18, 2011 1:40 pm
- Location: Wide Bay QLD
- equipment: Anything I choose :P
Re: Element guard question
by CyBaThUg » Wed Jan 07, 2015 8:26 pm
i have the o ring infront of the 50 mm cap and it leaks like a siv but when i just plug the element in with the o ring it seals nfi wat is causing it :angry-banghead:
- CyBaThUg
- Posts: 493
- Joined: Thu Sep 27, 2012 7:54 pm
- Location: townsville
- equipment: pot still
Re: Element guard question
by CyBaThUg » Thu Jan 08, 2015 9:22 am
I am doing the jig right now chucked a sicky to sort this bloody boiler out lol turns out on the end of the bsb join had a little flat spot where it was hit with the tig welder flapper discd it down and walla no leaks woo hoo
- CyBaThUg
- Posts: 493
- Joined: Thu Sep 27, 2012 7:54 pm
- Location: townsville
- equipment: pot still
23 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 19 guests