Carel IR33 controller

A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.

"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"

the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.

Regards,

aussiedistiller team.

Carel IR33 controller

Postby warramungas » Thu Jul 21, 2016 10:18 am

Hey guys. Was out the scrap yard looking for something and found a commercial fridge had been ditched.
Picked up the controller off the top of it. Does anyone know anything about this model. Been trying to decipher the literature but its over my head. Does it do hot and cold off two relays?
WP_20160720_13_52_58_Pro.jpg
You do not have the required permissions to view the files attached to this post.
warramungas
 
Posts: 1005
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor nor east Perth (by about a thousand kays give or take)
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still

Re: Carel IR33 controller

Postby rumdidlydum » Thu Jul 21, 2016 5:59 pm

I'm no expert but to me its just for cooling by the looks af the diagram.
rumdidlydum
Moderator
 
Posts: 2615
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: Carel IR33 controller

Postby warramungas » Thu Jul 21, 2016 9:45 pm

rumdidlydum wrote:I'm no expert but to me its just for cooling by the looks af the diagram.


Shit. Oh well. Keep it for now. I may find a use for it.
warramungas
 
Posts: 1005
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor nor east Perth (by about a thousand kays give or take)
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still

Re: Carel IR33 controller

Postby Buzz » Wed May 17, 2017 10:49 am

If it is like some small Carel controllers I've worked with before then it can be used for cooling or heating but not both at the same time. Cool or heat is set by programming the controller with the few front buttons, if used in a fridge set to cool or say if used in a bain-marie set to heat, default is cool. You should be able to download the manual for it from the Carel global website.
Buzz
 
Posts: 13
Joined: Mon May 08, 2017 10:08 am
Location: Central Ranges NSW
equipment: a thirst for distilling knowledge and a 20 year old Spirits Unlimited aluminium pot still

Re: Carel IR33 controller

Postby warramungas » Wed May 17, 2017 11:11 am

That's alright mate. It was a freeby off an industrial fridge that was disposed of. Stc's are cheap (carels aren't) but if anyone wants it and is happy to pay postage they can have it. I've got no use for it. :handgestures-thumbupleft:
warramungas
 
Posts: 1005
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor nor east Perth (by about a thousand kays give or take)
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still


Return to Electrical Hardware



Who is online

Users browsing this forum: No registered users and 7 guests

x