Another controller

A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.

"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"

the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.

Regards,

aussiedistiller team.

Another controller

Postby Astro » Fri Jun 15, 2018 1:14 pm

Not much too look at just yet, parts are still coming in.
Still waiting on the SSR, fan and shroud and voltmeter
Still looking for a switch and light to utilize the existing holes in the front
my element has an IEC cable so will plug into the controller, 2.5mm cable and gland will get power in.
hopefully it pass's leccy tests with the paint otherwise it will get pulled apart and stripped
Cant get a start on layout until the rest arrives but its a start
IMG_0005.JPG

IMG_0007.JPG

IMG_0008.JPG
You do not have the required permissions to view the files attached to this post.
Astro
 
Posts: 192
Joined: Mon Apr 23, 2012 9:39 am
Location: goldfields vic
equipment: 2" pot and 2" bok on 50ltr elec keg boiler

Re: Another controller

Postby Astro » Mon Jul 02, 2018 11:12 am

Got most of the parts with only a few minor things still coming.
Done a continuity test and couldn't get jack on the gutted battery charger so got to strip this paint before i can start.
36448120_10156513938139028_498244720623878144_n.jpg

Be finished sooner than later hopefully, got 80ltr stripped rum here and running out of storage kegs
You do not have the required permissions to view the files attached to this post.
Astro
 
Posts: 192
Joined: Mon Apr 23, 2012 9:39 am
Location: goldfields vic
equipment: 2" pot and 2" bok on 50ltr elec keg boiler


Return to Electrical Hardware



Who is online

Users browsing this forum: No registered users and 11 guests

x