punchy21 wrote:Canadoz wrote:Will be using a 2200w to start with, and see how it performs, just wanted to future proof in case I feel the need for more watts. I'll keep the outlet amperage in mind for then.
What's different about a 20A outlet? I know the garage has a 20A circuit breaker dedicated to it on the panel.....
Will be on its own circuit unlike a 10A outlet which can have a shitload more - and protected by the 20A breaker you mentioned, and the outlet is rated to carry 20A...Canadoz wrote:Raises another question, what gauge of wire should be used for the internal wiring of the controller?
2.5mm2 will be ok for 2200w
OK, Cheers, I think I'd better not get carried away on heater size until I can have an electrician look at the house wiring for me then.
I think I'll use 3.31mm2 (12AWG) silicone insulated braid to wire it for a better overhead margin then.