controller, tested worked/failed

A section for all electrical discussions, including controllers, elements, wiring diagrams & schematics.
Forum rules
By participating in this section you acknowledge you are aware of aussiedistiller,com.au forum rules, policies & disclaimer.
If you are not aware please go to the rules section "before" you continue in this area of our forums.

"you expressly agree to hold aussiedistiller.com.au, Administration and moderator team, harmless for any property damage, personal injury and/or death, or any other loss or damage that may result from your use of the information or service provided here in and through out our forums"

the information found in our forums, are from many sources, qualified and un qualified as is the nature of the internet, and as such you use this information at your own risk. No liability directly or indirectly will be accepted by aussiedistillers.com.au, administration, the mod team or their heirs, whatsoever.

Regards,

aussiedistiller team.

controller, tested worked/failed

Postby rumdidlydum » Sat Apr 18, 2015 10:28 pm

Well.. this could be Pandora's box... but what has worked and what has failed..

This is a place where you!!! who have built a controller have had multiple runs (10+) can say whether you're setup works or not,with a list of components. .


I must stress no slander or technical jargen. And built by a confident person. No back yard shell be right jobs.
rumdidlydum
 
Posts: 2619
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: controller, tested worked/failed

Postby rumdidlydum » Sat Apr 18, 2015 10:36 pm

rumdidlydum wrote:
rumdidlydum wrote:Bring on the spirit runs :happy-partydance:
All tested and earth leakage tested.. :handgestures-thumbupleft:
1x pc fan
1x nokia charger
1x 3600w speed controller
1x volt/amp display
1x 16amp circuit breaker
+ 2 oak barrels
+ minimum 3 months


= mmmm rum



update
don't get the speed controller or the lcd screen.
Multiple failures with components.
But the fan and box is good. :teasing-tease:
rumdidlydum
 
Posts: 2619
Joined: Sun Oct 27, 2013 7:20 pm
Location: CQ
equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs

Re: controller, tested worked/failed

Postby bayshine » Sat Apr 18, 2015 11:42 pm

I've built one of punchies controller from the electrical section on this forum and it's done about 50 runs with no problems :handgestures-thumbupleft:
I used the parts on his diagram,all purchased from rs online and got a sparky to test it and all works fine
:music-deathmetal:
bayshine
 
Posts: 873
Images: 0
Joined: Sat Mar 16, 2013 11:30 pm
Location: Turquoise coast dubbya aye
equipment: FSD 6 inch 5 plater block head On a FSD 100lt pro boiler
3” copper reducer bokka on a keg boiler


Return to Electrical Hardware



Who is online

Users browsing this forum: No registered users and 63 guests

cron

x