Page 2 of 2
Re: Bens power controller
Posted:
Thu Sep 17, 2015 8:19 pmby benpandaae86
The only thing i was worried about was that its 110v not 240v (page 3 on the element )but im only a silly fitter i leave the wires up to my sparky mates
Re: Bens power controller
Posted:
Thu Sep 17, 2015 8:29 pmby 1 2many
Have a look at 2.6, it state there is a relay at 240v 3Amp which is no good for switching elements
And there is a 12v output for cotrolling SSR's.
Re: Bens power controller
Posted:
Thu Sep 17, 2015 8:37 pmby benpandaae86
The reason i got this one was because its for ssr's
Re: Bens power controller
Posted:
Thu Sep 17, 2015 8:49 pmby 1 2many
Ok gotcha, yeah should be good. :handgestures-thumbupleft:
Re: Bens power controller
Posted:
Thu Sep 17, 2015 8:55 pmby rumdidlydum
All the ssr i have seen have a 3 to 24v input signal.
I have read in on the net that some ebay sellers describe they can handle ssr but when use it the relay burns out. The mod i mentioned earlier is easily removes the mechanical relay so that it can control the ssr. But that is for the rex c100.
I i have yet to get mine and mod. :D
Hopefully your pid is what you paid for. :handgestures-thumbupleft:
Re: Bens power controller
Posted:
Thu Sep 17, 2015 9:03 pmby 1 2many
He doesn't need to remove a relay, Ben's device controls the SSR with out relay.
The relay is an extra output low current 240 volt switching.
Re: Bens power controller
Posted:
Thu Sep 17, 2015 9:44 pmby benpandaae86
Does this mean i can adjust the power with this
Its off page 3