Aussiedistiller, Home Distilling, Moonshine, Home Brew

Hi I am in the process of starting a 2" pot with Liebig build and I am wanting to fit to a pure distilling boiler.
I have read that I can get a t500 adaptor from fsd Do the t500 and pure distilling have the same size boiler lid? And also how does the adapter work. I am intending on getting a power control for the boiler as well.
Any help would be appreciated.

Cheers
Mark

Call FSD and find out, you definitely know then :handgestures-thumbupleft:

Go a shotty condenser not that much harder to make. And can be reused on a bubbler down the track. Trust us if you enjoy a drink you are gunna want better than a 2" pot. But a pot is a good way to learn..pot adapter is a 2" ferrule with a male thread and a backing nut..

Pretty sure the boilers are the same mate.

The adapter screws into the lid and gives you a 2" triclamp ferrule to clamp your still onto.

copperhead road wrote:Call FSD and find out, you definitely know then :handgestures-thumbupleft:

Cheers mate will do

bluc wrote:Go a shotty condenser not that much harder to make. And can be reused on a bubbler down the track. Trust us if you enjoy a drink you are gunna want better than a 2" pot. But a pot is a good way to learn..pot adapter is a 2" ferrule with a male thread and a backing nut..

Thanks bluc does a shotty condenser better than a Liebig for the pot still and could I use it on the pure distilling boiler? I do enjoy a drink :obscene-drinkingdrunk:

Zak Griffin wrote:Pretty sure the boilers are the same mate.

The adapter screws into the lid and gives you a 2" triclamp ferrule to clamp your still onto.

Cheers zak sounds nice and easy

Shotty will do it easier and if/when you update to a bubbler with 3600w poer input it will still knock it down easy.. :handgestures-thumbupleft:

I have a liebig on my 6", no bother at all, hardly uses any water at all

I'm glad I upgraded my Gatlon gun condenser to 3"

T 500 is a 25 liter boiler with a 50mm hole in the lid
Pure distilling is a 30l boiler with a 64mm hole in the lid.

They are no the same

Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all

Hey Swedish pride What size is your Liebig? I am assuming the bigger it is the less water needed to keep temp down

ed9362 wrote:T 500 is a 25 liter boiler with a 50mm hole in the lid
Pure distilling is a 30l boiler with a 64mm hole in the lid.

They are no the same

Cheers ed glad I found that out before ordering :handgestures-thumbupleft:

No prob, if you get the wrong one you can buy replacement lids from kk with either size hole

mark84 wrote:

Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all

Hey Swedish pride What size is your Liebig? I am assuming the bigger it is the less water needed to keep temp down

it's about 30" long 3/4 over 1/2, knocks down 5000w full throttre on a strip run, so a spirit run is a walk in a park.

Swedish Pride wrote:

mark84 wrote:

Swedish Pride wrote:I have a liebig on my 6", no bother at all, hardly uses any water at all

Hey Swedish pride What size is your Liebig? I am assuming the bigger it is the less water needed to keep temp down

it's about 30" long 3/4 over 1/2, knocks down 5000w full throttre on a strip run, so a spirit run is a walk in a park.

A shotty is the same as a Liebig but it has multiple inner tubes so reduces your overall length but keeps same cooling efficiency. This means you can run them vertically to reduce smearing. :handgestures-thumbupleft:

sure, any condenser will do the job.
but he already has a liebig, no need to get a new one if the one he has is up for the job.
not sure if a liebig smears more, but one of the downside to a shotty is that is need to be run vertically to be as efficient as possible, a liebig can do any angle really

Here is how I run my 2" pot with shotty vertical is the go :handgestures-thumbupleft:
All I need is some 4" tees and I got a bubbler spewin I missed the ones for sale recently :handgestures-thumbdown:
Was going to make a Liebig but I had the gear to make a shotty.



Stripping some ujsm.

Here is my 2 inch pot still with Liebig condenser. During a spirit run my spirit comes out at 20 degrees

That is the go plumby :handgestures-thumbupleft: I don't think it matters which one u are running they both work well but the only thing better for a shotgun is moving it to a bubbler