pics of my pot

[crozdog]

thought you might like to see these pics.

boiler, pot & liebig

2011-12-11 10.12.20.jpg

head

2011-12-11 10.12.46.jpg

parrot

2011-12-11 13.24.02.jpg

[MR-E]

Nice, I like the idea of the tee on the parrot :handgestures-thumbupleft:

[googe]

Nice job mate :). I want to do a leibig just like yours!. Thanks for sharing.

Cheers

[MacStill]

Nice, I like the idea of the tee on the parrot :handgestures-thumbupleft:

First one I've seen like that, great thinking :handgestures-thumbupleft:

[crozdog]

Thank for the comments guys. it was fun to make & works great.

FYI, all joints soft soldered :smile:

the boiler has 2 x 2200watt elements. I use both for stripping, but turn 1 off when I start to get output on a spirit run.

Nice, I like the idea of the tee on the parrot :handgestures-thumbupleft:

First one I've seen like that, great thinking :handgestures-thumbupleft:

I just had to file the ridge off one the inside so the pipe would slide right through.

Nice job mate :). I want to do a leibig just like yours!. Thanks for sharing.

Cheers

from memory its 1.2m of 1.5" over 1.2m of 3/4". the 3/4" is partially crimped at 45 degrees alternately all the length of the inside to generate turbulence in the vapour & cooling water. did it with the corner of the vice :handgestures-thumbupleft:

[Panda]

Nice, I like the idea of the tee on the parrot :handgestures-thumbupleft:

First one I've seen like that, great thinking :handgestures-thumbupleft:

that is brilliant